Working on my second build and first time fretting. Had trouble getting the fret slot depth consistent. Frets went in ok but now I’m having trouble getting the ends to feel comfortable. I’ve been working at them but can’t seem to get them feeling comfortable. I don’t want to overwork them and cause myself more trouble. Any tips or suggestions?y
Tags:
Hi, it looks like you have the fret ends rounded ok. It looks like the large radius (for a fingerboard) is making the fret ends stand overly proud of the board. You may have to rework the fret ends to better match the fingerboard edge.
A simple depth gauge is to use two small clamps to hold a strip of timber to the side of the sawblade. Set it a fraction deeper than the fret tang.
Taff
Michael, I use a modified file, smooth or fine cut so as not to rattle the fret from their seating. I knock off the handle tang and epoxied to a suitable block of wood. Then at the angle I prefer I run it down the length of the fingerboard across all the fret ends at the same time.
Then I go over all the fret ends individually to remove any burrs and file marks prior to polishing.
With a rounded fingerboard edge it can leave sharp edges of the fret to stick out more instead of blending in, so this has to be knocked of with a small modified file.
In your case be I'd careful you don't bevel so much as to lose playing surface on top of the fret. I have another file that is set into a block at an angle so the bevel is uniform. You see them on Stumac's site. I made my own.
Hopefully you only make things difficult the once.
Taff
I sort of cheat a bit... My necks are 42 mm wide, so I pre-cut my frets to 41mm, clean up the ends & tap them in. It means my frets finish .5mm from the edge of the fret board, which is no drama because the strings are about 10mm from the edge anyway, & I never get any sharp bits! A light sand along the edge & its all good!
Mitch,That is how I do my frets. I do mine a bit shorter, "4 baseball cards thickness" more narrow then the fret board. With more sanding. No rules! jeff
The title says it all, “First time fretter” so don’t expect to get it perfect on the first try, I didn’t? I’m not sure what kind of files you’re using, but it does make a difference, so if you’re planning on more fretting, get some good ones? You’re on the right track tho? Ask many questions before you get to the point of no return. It looks like you’re pretty much there, just take your time, looks to me like you’re almost at that 35 degree angle it requires? Cheers & good luck to you :)
Thanks Brian. Finished the build. Frets came out ok. Just took some patience. I’ll definitely watch the radius on the next one. Overall fretting was not as hard as I had feared.
Hey that's good Michael, all sorted.
Putting the frets in from the fingerboard edge is fine. I have to do it when refretting some necks with a bound fingerboard, but it is time consuming and getting all the fret ends to look perfectly in line when sighting down the neck is a chore.
On my CBGs this is the quickest way for me. Before gluing on the fingerboard.........
Tap in frets
Cut off overhang flush. Special nippers.
Go to belt sander sand the two edges so frets ends are flush
Then hold the fingerboard at an angle on the belt so that the ends all get done [beveled] at the same time. I can even roll the board over on its edges to get that worn in feel on the edge of the fingerboard. Timber and frets at the same time
Glue board to neck then level and polish frets and their ends.
The time I save in the early stages leaves me more time for the important stuff later.
Taff
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Friday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray on Friday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!