Replies to This Discussion

Permalink Reply by Tres Seaver on December 8, 2009 at 1:39pm

Spacing is really a matter of taste. I prefer to have strings closer together than some like it, for instance.

The classic recipe for action on a fretted neck is "dime at the first fret, nickel at the 1welfth fret."

• ▶ Reply

Permalink Reply by Tim on December 8, 2009 at 2:51pm

go for whats comfortable you to play.

• ▶ Reply

Permalink Reply by Thomas A. Boatwright on December 8, 2009 at 3:15pm

Theres no right or wrong way to do this really. If you're playing and thinking "i wish I would have a higher action" or "I wish the strings were closer together" then you've answered your on question.

• ▶ Reply

Permalink Reply by Outhouse Instruments on December 8, 2009 at 3:51pm

USUALLY ... lower is better. I guess I'm a holdover from my bass playing. As low as possible w/out buzz.
BUUUUUT ... if you wanna play slide, you gotta keep it high enuff to keep from bumping the frets.
Since it's built and playable, lower the action a bit at a time to see what happens.

Matt

• ▶ Reply

Permalink Reply by Wes "I'm Baaaaack" Yates on December 8, 2009 at 4:08pm

Good thing is on most builds, nuts and saddles/bridges can be changed out. if its too high, lower it. Too wide or narrow, change it out. Too shallow, make a new one.

-WY

• ▶ Reply

Permalink Reply by Darren Gosling on December 10, 2009 at 12:50pm

thanks guys, Since I have built this guitar and strung it the neck has bowed. ;(. It looks like i got to do some rework. I was thinking of planning the bow out, my neck is about 40mm thick at moment. I suspect it is a combination of change of environment (my shed to indoors) and the stringing. I didn't fancy fitting a truss rod just yet but i have not ruled it out.

• ▶ Reply