Replies to This Discussion

Permalink Reply by Cause the Blue rat on November 21, 2018 at 5:30am

The nut will be cut to match the string spacing or either a Gibson or Fender. Then the bridge's string spacing will give the taper at that end. This will give me the string spacing needed for electric pickups. Because the strings will be more in the center the neck will be straight on both sides. So it wont be the exact feel of an electric. But a lot more comfortable than just a flat neck. 

• ▶ Reply

Permalink Reply by Paul Craig on November 21, 2018 at 12:50pm

I've used the Gibson style grooved nuts that attach to the neck at the end of the fretboard(Flat Mount). Then adjust the string groove depths as needed. You can use some sandpaper to shape the top of the nut to match the fretboard shape if you want and it will all look fine.

• ▶ Reply

Permalink Reply by ILL GREEN on November 26, 2018 at 3:50pm

Working on my little guitars. Just got the CB Gitty templates, so they still got the blue wrapping :P

• ▶ Reply

Permalink Reply by Timothy Hunter on November 26, 2018 at 7:06pm

is that headstock angled the wrong way? or isnt the fretboard glued on?

• ▶ Reply

Permalink Reply by Cause the Blue rat on November 29, 2018 at 8:24am

No it's right. That's the new under the strings slide set up. Give a more uplifting sound. : )

Looking forward to seeing this guitars ILL! 

• ▶ Reply

Permalink Reply by ILL GREEN on November 29, 2018 at 9:02am

Hahaha! Nah, nothing is glued yet. I just don't want the neck to bend in this humidity so I keep them flat with the headstock upward.  Waiting on a couple finishing pieces from CB Gitty but I've already routed out the cavities. Its gonna have internal effects too. I'll keep yall updated or create a new thread in a week or so.

Thanks Cause the Blue Rat!!

• ▶ Reply

Permalink Reply by Paul Craig on November 27, 2018 at 12:56pm

Those look good.

• ▶ Reply

Permalink Reply by Cause the Blue rat on November 29, 2018 at 8:28am

A kerosene heater is what's coming to my work bench soon. With my garage hovering between 30 to 40 degrees (-1.10 to 4.4 c ) it's a bit to cold to do anything. Got to many things I want to play with out there.

• ▶ Reply

Permalink Reply by BrianQ. on November 29, 2018 at 8:48am

I hear you rat, my work space heater just took a dive. I ve got a bunch of stuff for gifting that needs finish too.

• ▶ Reply

Permalink Reply by Taffy Evans on November 29, 2018 at 11:12am

Do you guys want some of my 44deg c, its been in the 40's too long now.

Taff

• ▶ Reply

Permalink Reply by Paul Craig on November 30, 2018 at 7:07pm

I have one of those electric radiant heaters. It adds some more light, but it draws a lot of amps so you can't use it and a large power tool at the same time. That's a big draw back.

I want a wood burning stove, in the workshop and in the house.

• ▶ Reply

Permalink Reply by Cause the Blue rat on November 30, 2018 at 7:22pm

A wood stove would be awesome. But it's something that wont give instant heat. And is equally as slow to shut down. But you can't beat the cost of it's fuel. It's dry heat. Or the smell of wood smoke on a cold winter's day. I grew up with wood heat. Not something I would want to deal with again.  I've fallen in love with my thermostat and central heating. 

• ▶ Reply

• ‹ Previous
• 1
• …
• 63
• 64
• 65
• 66
• 67
• …
• 187
• Next ›
• Page