I need to buy some booze, and I was wondering if any one had advice as to which bottle 'o hooch has the best neck for makin' into a slide? The only slide I've made so far is real narrow-- good enough or one or two strings only. I want/need a stubby slide that's wide enough for three or four strings. And yes, I WILL base my next alcohol purchase on the basis of whether or not the bottle's neck is good slide material, rather than what's inside the bottle! :)

Views: 3593

Reply to This

Replies to This Discussion

I have only used Wine bottles for slides so far. I trounced all over a Makers Mark bottle and ended up with a pile of shards. A lot of good liquor bottles have too much going on in the neck to make a good slide. And i go thru plenty of wine in my house. Drinking and making stuff are 2 of my favorite hobbies. —B
I find a good Shiraz is the best choice...like the 2003 Yellowtail Premium. Of course, after such a delectable bottle, I usually find it wise to stay away from tools and glass...unless I want a trip to the ER!
Wine bottles for sure....most liquor bottles are either too thin or are all funky near the neck. (the only exception I can think of are higher end scotch bottles which are similar to wine bottles)
Check your local recycling center or look in the blue bins at the side of the road (if you're not too proud) for bottles. Get as many as you can: the success to failure ratio is pretty low.
I have a Boyd & Blair potato vodka bottle I've been eyeing up for just this purpose. Thanks for asking the question first, Isaac.
The neck on this bottle is fairly straight but the opening will only fit my pinky finger. The bottle was also wax dipped over the top so that will have to be removed prior to any cutting/breaking.

Plus it's a damn fine vodka.
Grey Goose Vodka and port wine bottles work well because the glass is thick. Imported glass from Italian wine bottles tends to be of superior quality too. Enjoy.
get a coricidin bottle....antiques stores about 10 bucks
Anything thick, with a straight neck.
Cut green glass slides have the most mojo, blue is second with the coricidin bottle being 3rd.

lol

Matt
Vino.

-WY
Thanks guys! Looks like I'll have to stock up on some wine! Oh darn! :)
Yep green or blue wine bottles..
Just thought I would throw this in. Once you got the bottle, you need to get the neck off of it. Here is a good video that shows how to get the neck off using a rotory tool with diamond cut off wheels. http://www.youtube.com/user/bigdaddysmojo#p/u/133/oNfyWl4N6Xs
THanks for that link! Great tutorial!

Wild Rover said:
Just thought I would throw this in. Once you got the bottle, you need to get the neck off of it. Here is a good video that shows how to get the neck off using a rotory tool with diamond cut off wheels. http://www.youtube.com/user/bigdaddysmojo#p/u/133/oNfyWl4N6Xs

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans 16 hours ago. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Uncle John commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Interesting on how you strung it up.  Have a good week, Andries."
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

On Top of Spaghetti: 3D Printed Cigar Box Guitar

"I did not know that Kale! It’s a new song to me. I guess I don’t get around. It is very…"
13 hours ago
Taffy Evans replied to Bill Andy's discussion Nut
"Hi Bill, I see your problem, a neck with no fingerboard, yuck. Anyway, you will have to cut a…"
16 hours ago
AGP # liked A.D.EKER's photo
18 hours ago
AGP # liked A.D.EKER's photo
18 hours ago
AGP # liked Poorness Studios's video
18 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

""Thanks 'UJ' & Doug, Needless To Say!, "She Is Not Amused" ;-D"
18 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"There’s a company named Guyker that makes antique bronze tuners, they look like an old penny,…"
19 hours ago
Gary O'slide posted a video
19 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks Doug Glad you Do !"
19 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

Decoration on the Spider & Frog

"Thanks UJ !  GG (high) D, G .  only i reversed the stings On top is not the G (low) but…"
19 hours ago
BrianQ. liked Poorness Studios's video
20 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->