For the life of me, I can't get my frets seated well on my fret board. I'm using an oak fret board with StewMac medium jumbo frets and I cut the slots with a Stanley pull saw. I do bend the fret wire before installing it. When I tap the wire down, the tang on the fret wire doesn't seem to be grabbing the wood well enough. Either one end will raise up a little or the wire will not seat consistantly. Would another hardwood be any easier to work with?

Any advise is greatly appreciated.

Views: 306

Reply to This

Replies to This Discussion

I'll be watching this thread for sure. On my second build I'm planning on installing frets. Looking forward to reading what the experts have to say.
Sure the slot is deep enough?.
It shouldn't be that difficult. Line up tang, whack it in.
Sounds like your saw is too wide. Glue the frets in.
With my limited experience fretting,it sounds to me like what I experienced when I was practicing on a scrap piece.
My slot saw cut too wide but when I switched to a regular coping saw and bowed the frets they popped right in.
Doc Oakroot said:
Sounds like your saw is too wide. Glue the frets in.

I agree with Doc, The saw width is perhaps too thick. You may try and carefully squeeze the teeth in a vise.
Don

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's album
33 minutes ago
A.D.EKER posted photos
34 minutes ago
A.D.EKER posted photos
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
A.D.EKER posted a video

RunAway Girl BCB 2024

Domestic Disturbance Home cruelty and mis understanding today's Problem Child, true all times leads to Runaway's Girls & boy's that run away from there see...
1 hour ago
BrianQ. commented on Cigar Box Nation's status
"Got my popcorn ready, waiting for the show! :)"
8 hours ago
BrianQ. commented on Rich's photo
Thumbnail

RTL Drawing box 1

"Defending the nation, one cbg at a time!!!"
8 hours ago
BrianQ. liked Rich's photo
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Six Chugger CBG Build

"Just stealing a page from your playbook Rich! Since all the boxes are vintage, I decided to place…"
9 hours ago
Rich commented on Doug Thorsvik's photo
Thumbnail

Six Chugger CBG Build

"Interesting,  the juxtaposition of the 3D printed handmade items and the Singer sewing machine…"
12 hours ago
Rich liked Doug Thorsvik's photo
12 hours ago
Rich commented on Cigar Box Nation's status
"Looking forward to it."
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->