Replies to This Discussion

Permalink Reply by BrianQ. on August 16, 2023 at 6:56pm

Why can’t you make your own? 

• ▶ Reply

Permalink Reply by James Pobog on August 17, 2023 at 5:30am

Not sure I have that skill set/patients.

• ▶ Reply

Permalink Reply by Carl Floyd on August 17, 2023 at 4:29am

I would say no.  The spacing will not be right.  Get some small triangular files & notch it.

• ▶ Reply

Permalink Reply by James Pobog on August 17, 2023 at 6:46am

OK, really don't want to, but I guess I gotta try cutting one.

Can someone point me to a good tutorial?

• ▶ Reply

Permalink Reply by Taffy Evans on August 17, 2023 at 11:35am

Google is your friend.

• ▶ Reply

Permalink Reply by T-Gripped on August 18, 2023 at 2:16am

• ▶ Reply

Permalink Reply by James Pobog on August 18, 2023 at 2:59am

I learned the 'flat pencil' trick. Pretty cool...

• ▶ Reply

Permalink Reply by Taffy Evans on August 18, 2023 at 12:30pm

Ha ha James, I've been using the same flat pencil for over 25 years. 3 corner files may give a too-wide slot for some strings. some needle files will work and even a saw cut for others. But nut files are the best option.

Taff

• ▶ Reply

Permalink Reply by Diglydog on August 20, 2023 at 1:43am

If you don't fancy spending the cash on proper nut files, a set of nozzle cleaners is a cheap option. You effectively get a cheap set of tiny round files for not much cash.

Good luck :-)

• ▶ Reply

Permalink Reply by A.D.EKER on August 20, 2023 at 4:22am

  Hi James ! some nut Bone stuff ! models for acoustic ,or DIY for cbg ,i agree whit  Taffy about the file ,use only for the wounded string ,i say, for the others, i use a small metal saw, i gleu em whit componenten glue (mix),on to the neck slot, dril a small hole , for a safety (small) nail aswell to sequre!  easy peesee ! done in a jippie ,you just need the stuff (Buy) otherwise use a soep BONE but it smells nasty if you cut it whit a saw ,but its cheap ! there are tricks to ,whit a dowel to get the right height !Good luck!

• ▶ Reply

Permalink Reply by Order99 on November 6, 2023 at 4:40pm

 Fret files are great,  cleaning files for  blowtorch tips are dirt cheap in a pinch...

 But if you can't afford anything else-save your broken strings, cut them to about 6-8 inches, just big enough for your hands to grip or to wrap the ends around some dowels. Find your slot location, nick it just enough with a craft saw or triangle file-then pick the string gauge you want and begin filing it with the matching string...professional fit every time. And if you break the string in the process, grab the other fragments you kept...

BTW, if you want gut, fluorocarbon or similar-or even very light steel-you might be able to use bamboo or hardwoods for a nut. Many a disposable chopstick have I sacrificed for Ukulele nuts and saddles, even used them for a banjo with light gauge steel, though I barely scored those and let the strings settle in a their own pace for a few days. And don't forget that bamboo can be heat treated for greater hardness-I use a cheap toaster oven for the process.

• ▶ Reply