About done with my first and needing to drill a couple of sound holes in the paper covered cigar box.

I have some 1" Grommets/w screens from CB Gitty.  The website site says the inside diameter of the grommet it "about 1/2"......    Would be nice if they were exact 1/2".  I've drilled test holes in a piece of wood that approximates the thickness of the cigar box lid.

1/2" hole is too small and grommet won't fit.

5/8" is way too big.

Was hoping these would just "snap in".  Folks that use these are you just drilling a bigger hold and then gluing?

Thanks for the help,       Mark

Views: 373

Reply to This

Replies to This Discussion

Hi, what I would do is drill the 1/2" hole and ease it to size with a 3/8" dowel stick wrapped in your sandpaper of choice.

Taff

That's the ticket!  Worked great.  Sometimes the easiest solution is the best.....

Thanks,

Mark

IMG_1231.jpg

If you have a barrel sander dremel bit, then your as good as gold?

Yep, BrianQ's suggestion is good. I have a dozen or so of those and the smallest is 9/16".
If you want to go power assisted this is what I do for small holes, you can use a rill press or a hand drill.




Cheers Taff

thats a great idea!

I’ve always used a stepped unibit and a little hot glue.

I use a 9/16" spade bit, then superglue the grommet. Be sure to put a backing board behind the lid before drilling the hole to avoid tear-out.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 6 hours ago. 1 Reply

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

BrianQ. replied to Bill Andy's discussion Nut
"It’s customary to include a pic of the neck when you’re asking these kinds of…"
6 hours ago
BrianQ. liked Rob (Uker) Porras's photo
6 hours ago
Bill Andy posted a discussion

Nut

Just got a prefretted walnut neck, it does not have a lip to glue nut against, should i dado to set…See More
10 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
13 hours ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
13 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
13 hours ago
BrianQ. left a comment for Clydr
16 hours ago
BrianQ. left a comment for James C Bailey
16 hours ago
BrianQ. left a comment for Airam
16 hours ago
T-Gripped liked Dogleg Steve's video
16 hours ago
T-Gripped liked Gary O'slide's video
16 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Thanks. Ron.  I agree on the Padron boxes.  I think they are close to the best for looks…"
18 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->