Replies to This Discussion

Permalink Reply by Ron "Oily" Sprague on January 17, 2017 at 6:33am

John,

That is a fantastic explanation of how nut and bridge slots should ideally be cut and finished. I hope every builder here takes a look at your link. Great find!

• ▶ Reply

Permalink Reply by john mackay on January 17, 2017 at 7:13am

oh at last you agree .lol

joking aside I must admit I know bugger all about tuning etc.

I can't even tune my own even with a tuner gizmo.

I can't tell the difference between a G to a g both the same to me so I get my son to sort it as he's more clued up than I am.

I enjoy making them but I'm completely blanked on how to play. when I have ago am lost!

I listening to music etc but that its.

I'm slightly deaf and have been all my life and I wear hearing aids when watching telly or if friends come round ..never where it outside.

anyway I'm glad you like the link above and hope others do to. 

• ▶ Reply

Permalink Reply by Grandpa on January 17, 2017 at 1:15pm

John, this is a very comprehensive sharing of info. Yikes, it makes zero frets look absolutely simple. When I read articles like this, I always come away thinking  it's a wonder that the nuts I cut even play on my gits!  I think most garage builders will enjoy reading this information, and, as I previously stated, be thankful that lesser-built nuts can still perform well on cbg's. Your shared information will assuredly move some of us to try and step up our game! Thanks.

• ▶ Reply

Permalink Reply by Jim Morris on January 17, 2017 at 2:22pm

Yes indeed, this is excellent info and as Grandpa says, also an excellent argument for zero frets. The amount of precision required to make perfect nut slots out of the perfect material requires time, patience and proper tools but most of us can pull off a zero fret arrangement pretty quickly and easily. Still, I sometimes try for a good nut thinking maybe I'll get it right this time. Nylon string instruments, like ukes, are much easier for me since the string won't cut into the nut material. Thanks for sharing this John.

• ▶ Reply

Permalink Reply by Bluesheart on January 19, 2017 at 1:22am

Great info! The nut is always the hardest part of a build for me, I'm using a zero fret more and more.

• ▶ Reply

Permalink Reply by darryl kernaghan on January 19, 2017 at 10:07am

Agree with all above, great post John

• ▶ Reply

Permalink Reply by 14 buck bass (aka antonio) on February 28, 2017 at 5:49pm

great info thanks alot for sharing it.

• ▶ Reply