Replies to This Discussion

Permalink Reply by Old Lowe on January 5, 2010 at 5:19pm

You can add a block to the end of the guitar to make the tailpiece move back or add some extra neck to your fretboard to move the bridge forward.
Also seems like you might be able to remove a little of the metal in front of the stringholes on the tail piece.
But for me I think if you extended the stick all the way thru the box you can attatch the tail to that part sticking out and make it sit wherever you want!

• ▶ Reply

Permalink Reply by Randy Webb on January 5, 2010 at 5:25pm

Wow... That never even occurred to me.

The drawing was a little off tho, cause the bottom part of the neck that runs to the back of the CB is not high enough to drive the tailpiece screw in. The box and boards are to scale, but the height of the tailpiece is not. I could add another board on top of it and let it stick out the back... (if that makes any sense without me drawing it in?)

Old Lowe said:

You can add a block to the end of the guitar to make the tailpiece move back or add some extra neck to your fretboard to move the bridge forward.
Also seems like you might be able to remove a little of the metal in front of the stringholes on the tail piece.
But for me I think if you extended the stick all the way thru the box you can attatch the tail to that part sticking out and make it sit wherever you want!

• ▶ Reply

Permalink Reply by Kevin Sprague (Knotlenny) on January 5, 2010 at 6:02pm

Nah, Maybe it's a "prehensile" tail piece.

• ▶ Reply

Permalink Reply by Bluesdog on January 6, 2010 at 12:51am

I'd cut the tailpiece and make a new fold on the cut end to mount it to the box, Daddymojo did that on his Dolerosa Resophonic and it looks very good to me.

You might not need to make it as short on your build as Daddymojo did on that one but you get the idea. Or you could also find one of those Django guitar tailpieces like this one

• ▶ Reply

Permalink Reply by Randy Webb on January 9, 2010 at 4:30pm

Ended up doing the tailpiece extension that was suggested by Old Lowe...Thanks. See the video to get an idea how it turned out...

• ▶ Reply