Replies to This Discussion

Permalink Reply by Doc Oakroot on June 7, 2009 at 7:55am

Some of those tuners are designed to have the signal pass through if the unit is off. If that's the case, just wire the piezo to the tuner's input and the tuner's output to the jack.

A cleaner solution, which does not depending on the tuner's characteristics, is to mount a separate piezo to drive the tuner. Piezos are cheap - you can use as many as you want.

• ▶ Reply

Permalink Reply by Mark Werner on June 7, 2009 at 9:12am

I'm going to buy one of those little clip-on tuners. Almost all the "pro" guitar pickers around here seem to be using them; and since I have so many different instruments I'm going to need a chromatic model.
Have you seen the "self-tuning" system Gibson is selling? Expensive....

• ▶ Reply

Permalink Reply by Doc Oakroot on June 7, 2009 at 9:51am

I bought one of the clip-on tuners to use at blues jams where I'm tuning up in a noisy room and can't hear my guitar at all. Works fine on the CBG, but not so well on the bass. Not very responsive at the low freqs.

Mark Werner said:

I'm going to buy one of those little clip-on tuners. Almost all the "pro" guitar pickers around here seem to be using them; and since I have so many different instruments I'm going to need a chromatic model.
Have you seen the "self-tuning" system Gibson is selling? Expensive....

• ▶ Reply

Permalink Reply by Delta Blues Classics - JStoltz on June 7, 2009 at 10:48am

I don't know how much they are, but a company, called N-Tune, sells a volume pot with a digital chromatic tuner built in. You pull the knob out a click, to go into tuning mode. It looks pretty interesting. Just thought I'd mention it, but I like the fact that you're figuring out how to do it with what you have on hand.

Jeff

• ▶ Reply

Permalink Reply by Roosterman on June 7, 2009 at 9:25pm

Sounds like a cool gizmo Delta... Il have a look at them.
Im going to try a test wire on the tuner as is first but failing that, Il try Docs suggestion. Id not considered running a piezo solely for tuning purposes 10 out of 10 again Doc!

• ▶ Reply