Hi, I have started collecting more timber for more builds....after the storm.

I should get a few builds like these out of it after processing the timber, the straight stuff anyway. These are fence palings too. When thinned to 2-3mm it sounds pretty good.

Cheers Taff

Views: 287

Reply to This

Replies to This Discussion

What kind of wood? They use softwoods like White Fir, Incense Cedar & Redwood in the states, not the greatest for necks? I saw a fell branch from an olive tree 3 weeks ago, but some odd got by the time I came back with a truck!!

Hi Brian Q, the fence timber I've used so far is Radiata pine from around my veranda. This new lot is pine also, but its been treated so I have to be careful how I work it.

I reckon that pine and other softer woods can work for a neck, if that's all you have, if certain guidelines are followed, namely...
Grain orientation - a hardwood fingerboard - and a hardwood fillet inlaid into the neck, a la truss rod. What do you think?

I tried the above on a 3 stringer as an experiment and it is still straight and not twisted. But then not woods are created equal.
Taff

I’m sure it changed density baking in the elements, probably made it harder? Most of the radiata over here is interior grade stuff like long planks & plywood & even pre-primed planks? There’s a ton of radiata in Northern California since it originated from Monterrey which is a few hours away from where I live? The fir they sell in big box stores is softer than the radiata, they also sell Japanese pine here, which is harder,but it’s pricey & the grain is beautiful.

"Grain orientation - a hardwood fingerboard - and a hardwood fillet inlaid into the neck, a la truss rod. What do you think?"

Great idea!  

So glad my dad has a table saw.  :)

by treated i think Taff means CCA treated. most pine for fencing in Australia is treated to H3 standard to last 20 years on or in the ground. Also to stop the termites eating your fence...lol

Hi, Tim is right on the money regarding my treated pine.

Twenty years protection you say Tim, hmmm the termites in my neighborhood couldn't wait that long. That's why I'm replacing it with steel.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

A.D.EKER commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Nice groep there UJ ! but what are these mysterioes green objects in front?"
14 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"If it was done for no reason Yes!  ofcourse !but lets hope it will not come to that Alan !…"
18 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"Only when there is a road next to it !Kale ! and maybee the size of the herd ! thanks for the kind…"
21 minutes ago
AGP # liked Uncle John's photo
1 hour ago
Bobthrubass commented on Bobthrubass's status
"I know I'm logged in but I got a new laptop and I can't log in cause I can't…"
4 hours ago
BrianQ. commented on Bobthrubass's status
"You seemed to be successfully logged in? But you need to notify the moderator, because he probably…"
5 hours ago
BrianQ. liked Uncle John's photo
5 hours ago
Doug Thorsvik commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Glad to see you have added a Chugger to your cigar box instrument ensemble! Looks like a fine…"
6 hours ago
Uncle John posted a photo

Chugger Review 2nd from left

Got my Chugger done a while back. It is second from the left in the photo.It uses a 3D printer fret…
8 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! And, yes, I did put the psalm to music using my 6-string years ago (back in my…"
8 hours ago
Bobthrubass posted a status
"Sorry I haven"t been on here awhile. PLEASE let me Reset my PASSWORD!!!!!"
9 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

"Very good.  Original song- did you put the psalm to music,  Doug?"
10 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->