Replies to This Discussion

Permalink Reply by John Sawyer on December 28, 2018 at 5:09am

Pics?  I'm not quite understanding the issue...

• ▶ Reply

Permalink Reply by Tom T on December 28, 2018 at 9:36am

If I understand correctly, you're saying that when you "bar" the three strings behind a fret, the largest string touches the fret correctly, but the two smaller strings do not?

If that is an accurate description, then I would think that as your finger continues to press down, the two smaller strings would make contact with the fret micro-seconds behind the larger string and you would have all three strings ringing out. Apparently, that is not the case.

Regardless, if you adjusted the three strings to individual action heights where they bar correctly, then I would take it as a victory and move on to making music.

• ▶ Reply

Permalink Reply by BrianQ. on December 28, 2018 at 9:37am

A few videos 

one on string height at nut

https://youtu.be/GiQPwDE-0U8

one on hardtail bridges

https://youtu.be/FB4b1X00vXQ

Good luck :D

• ▶ Reply

Permalink Reply by Taffy Evans on December 28, 2018 at 10:24am

Hi Larry, if as mentioned above you are not getting clean sounding bar chords this is a fix I have implemented for players with this problem.

Often not all the strings fall under a fleshy part of the finger, some can sit in the crease under the knuckle or forefinger, so will not get the same downward pressure. If this is the problem I simply respace the strings to clear the crease/creases. 

My last customer had the issue on one of his CBGs  but not his other. Fixed as above.

Taff

• ▶ Reply

Permalink Reply by Larry Ratliff on December 28, 2018 at 11:18am

I fixed it with my adjustable bridge. Lowered the large G string and raised the D and G string slightly now they all fret at the same time for a clear sounding strum.

• ▶ Reply

Permalink Reply by Taffy Evans on December 28, 2018 at 2:04pm

Thanks for letting us know.

• ▶ Reply