Hello all.
What is the thickest material you all have ever seen/used for a custom box.
I understand thinner is better sounding (to a point. You don't want a veneer box...:) ), and thinner is obviously lighter.
But would, say, a 1/2" thick box work?
Tags:
I used some Cedar fence plank that was 3/8" thick for a build. I routed the center of the top and back down to 3/16" leaving 3/8" strip around the outer edge. 1/4" would be the thickest I've used for top/back material.
Thickness won't be much of an issue if using a pickup.
1/2” would work for the body ,1/4”for the back ,1/8” for the top , I have used 3/4” pine for the body on my Teapot build gave me a nice bright sound , also used same thickness on my Parlour build turned out great now in saying that it depends also on type of wood you are intending of using all have there own sound & tone . All you can do is build it and find out for yourself .... keep us posted .
The natural acoustics of our box guitars is not really very good, thus the common use of a pickup. Once a pickup is installed, the box acoustics don't really play into it much. That beings said, the answer to your question is any thickness you want to use would be fine. Remember a Les Paul is about two inches of solid wood and it sounds fantastic.
Hi Shawn, I have posted about this a few times, here are a few pointers.
My tops are maximum 1/8" laminated or solid, along with appropriate [minimal] bracing. Backs the same.
The sides do not play a role in the sound production other than supporting the back and top to do their job, so thickness of sides is no sot much an issue. You don't want them robbing vibrations from the back or top. You really want them to be very responsive to the energy generated from the strings. A Soundhole is important.
When I put a magnetic pickup in an acoustic top it is not fitted to the top, but suspended below and protruding above.
When working on a full size guitar top I am more interested in strength and response so I pay more attention to those two things, and the thickness is what it is. It could be different for different guitars. But with CBG's I don't fuss so much and I can say " all around 1/8".
Hope this helps Taff
3/4 inch for the back and sides. The top is 1/8 ply. I never put sound holes in it. The idea was to make the body as light as I could but strong enough for a six string neck. Ended up added an extra bit of 3/4 ply on the back to secure the neck.
I'm not sure where you would find this thin ply. We have costumers who use it for patters. I get this and 1/4 ply patterns for where I work. I either take em home or they get tossed.
Hobby stores usually carry thin ply.
Thinner will generally be an advantage accoustically, but there are many intangibles, i have a very thick,[ around 12 mm] Macanudo cigar box from one of my very 1st builds, made of MDF, which i thinned the top down by about 1/2, it has very small sound holes, but is quite loud, but a deep tone, at that time i was adding piezo discs, and i think the extra thickness countered some of the handling noise, and made it a great sounding electric guitar
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 11 hours ago. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!