We invent new tricks to make building easier and better. Often we hear about them from others or read about them here on Cigar Box Nation, or Youtube videos.
Here are a couple: I read both here on Cigar Box Nation posts
1. When doing a difficult glue joint, like a fretboard or scarf joint, put a tiny tiny pinch of table salt on the glue after spreading it. It does a great job of letting the pieces grip each other without slipping while applying clamps.
2. When installing those tiny screws on the back of the tuning machines, rub the screw threads over a bar of soap or parafin wax to make them easier to drive and lessen the probability of stripping the screw head.
Another one I learned from experience. Gluing pieces together seems like a simple process. But it can become complex. On a difficult glue joint, I finally learned to do a dry clamp before the actual gluing operation. That way, you have all the clamps out and ready to go. You know exactly how to place the clamps so that they will do their job properly and not interfere with each other. Also have the clamp pads set up so you will not mar the wood.
Tags:
Salt sounds like genius..i've been using small brass pins driven into the face of the join and clipped off. Thanks for the wisdom.
I use sticky back silver mylar. About the thickness of aluminum foil. punch it out with paper punch, peel the back off and stick it onto the fretboard. The adhesive is strong enough that I have only had one come loose after building 26 instruments. Plus no drilling into the fretboard. The disadvantage is that this stuff is difficult to find. It is used in solar reflectors.
Check out 3d fingernail decals. Super thin. Designed to be clear varnished over. Also you can get a truckload for buttons.
I hammer the frets in the traditional way. When I glue in the fretboard, I use plenty of clamps and a full length piece of hardwood top and bottom to spread the pressure and prevent clamp marks. Make the top hardwood piece a little narrower that the fretboard so you can see and feel that the fretboard is properly centered over the neck. This method also insures that the frets are all properly seated. I have been using Hide glue on the fretboard in case I ever have to remove it.
What I learnt from my friend Tyko Runesson, swedish-swiss luthier who builds beautiful guitars and other stringed instruments: shorten the distance from nut to first fret half a millimeter, so the first halftone will not be sharp. This for classic guitars with low action, for high action as preferred for playing with a slide try with a millimeter.
Moritz I saw that somewhere else as well but it was not clear - does it mean to make a normal fretboard spacing with the nut moved closer to the frets a half mm, or is only the first fret shortened and the rest normal as measured from the nut?
cut your fret slots normally, then cut for your nut a tad closer to compensate for the open string being the only note without the extra tension of being pressed to the fingerboard.
a good article about compensation at the saddle and nut is:
http://www.lmii.com/scale-length-intonation
although, trying to measure and cut a slot to 0.5mm or 0.012" accuracy is so tiny, I accept the error inherent in the process anyway.
Seems like a good idea. Alternately, it seems like you could file a bit on the nut where it contacts the fretboard. Don't file the upper part of the nut, just the lower part, so the nut overlaps the end of the fretboard.. If the results weren't satisfactory, simply change nuts. Better than scrapping the fretboard. Just sayin' . I would like to hear other opinions on all this. On my ukes, the first couple frets seem pretty sharp. I keep lowering the action at the nut and it improves, but I don't know how far to go.
JL and Gary thanks for clarification: mark the positions of nut and frets as usual but put the nut for low action half a millimeter towards the first fret. The saw you are fretting with is about .6 millimeters so you get the idea.
Gary's idea of the nut protruding over the fretboard is a lot better than the alternative to glue a fine piece of wood or bone afterwards to correct a sharp first halftone...
Thanks all - for me sometimes it takes a few ways of explaining but now it makes sense!
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!