Replies to This Discussion

Permalink Reply by Paul Craig on October 1, 2018 at 11:29am

You can always place a couple of pieces of wood across the piece your working on and then put the clamp on top of that if you can just to help distribute the pressure more evenly.

• ▶ Reply

Permalink Reply by Timothy Hunter on September 30, 2018 at 3:44am

well, finally i have a bench!! still sorting things out. havent finished the light in the shed . thats a 4 foot fluro on the table. and a monitor and a raspberry Pi so i can get internet in there and check out youtube and forums  while i ( allegedly) work ...lol

Also got some tools from my partners dad who had to leave his retirement village due to health . got that vice, a jigsaw, some clamps and various other things. setting up a couple of power points , just need to mount them on the side of the shed.

• ▶ Reply

Permalink Reply by Taffy Evans on September 30, 2018 at 11:21am

That's the fun part, setting up. You'll probably change it 15 times before you get settled. Ha ha

Taff

• ▶ Reply

Permalink Reply by Paul Craig on October 1, 2018 at 11:39am

Nice bench Timothy, have lots of fun in there.

• ▶ Reply

Permalink Reply by Fergus Lester on October 4, 2018 at 2:34am

Slight change of rack. Have been curious about archery and bow making for years. So...
Work in Progress. Recurve bow with PVC pipe limbs https://imgur.com/gallery/etgMyzF

• ▶ Reply

Permalink Reply by Paul Craig on October 4, 2018 at 11:46am

I considered making a crossbow with the PVC, but never got around to it.

• ▶ Reply

Permalink Reply by Paul Craig on October 6, 2018 at 4:25am

I did make this out of PVC. The acoustics weren't great and the pickup isn't all that either, built for the "Plumbers Parts Challenge".

• ▶ Reply

Permalink Reply by BrianQ. on October 6, 2018 at 5:54am

I bet a flatpup would remedy that,Paul?

• ▶ Reply

Permalink Reply by Paul Craig on October 6, 2018 at 8:11am

True that, just about anything is better than what's on it now. Just left it on because of the weirdness of it. LOL

• ▶ Reply

Permalink Reply by Kigar on October 4, 2018 at 3:23pm

Ironically, I was making wooden bows and in some searching for a finish found the whole cigar box guitar thing!  Never tried a pvc one though.

• ▶ Reply

Permalink Reply by BrianQ. on October 4, 2018 at 5:10pm

That's funny Kigar, I actually found the original cigar box guitar group searching for a cigar boxes to make a purse at request of my niece :) but I had already built a cbg  in my teens, so it was a fateful reminder of my first guitar 

• ▶ Reply

Permalink Reply by Fergus Lester on October 4, 2018 at 2:34am

Change of TACK !

• ▶ Reply

• ‹ Previous
• 1
• …
• 55
• 56
• 57
• 58
• 59
• …
• 187
• Next ›
• Page