Hey good people of the nation, I wonder if you might be able to give me some advice.
I've got a smashing 3 bottle wine box (see photo),and I intend to turn it into a tenor/baritone ukulele. Knowing the downward pressure that strings can exert, I'm a little bit worried that the force might split the wood under the bridge.
The box is quite large at 13" x 13", the wooden lid is thin enough to resonate well. I'm only going to be running 4 nylon ukulele strings.
Should I brace the lid? (I've seen photos somewhere here) I'm going to be making it with a through neck, so could let the neck take the weight, but would this effect the resonance too much and deaden the sound?
At the end of the day I really don't want to damage the box.
Thanks in advance for your input.
Tags:
I have braced every one that I have made (all 5 so far), so you can tell that I am a fan (little joke there - fan bracing, get it). One thing that I have noticed is that bracing evens out the characteristics of the box regarding how it tests with a tuning fork (see a rather longwinded thread that I started on that subject here, but I have to warn you that it does go on a bit), so may make bridge placement less critical (and maybe not).
Alternatively, check the flatness of the box with a straight edge and then fit the strings. Check from time to time. If it has flexed noticeably then fit one or two strips, normally arched so they are thickest in the middle and taper to almost nothing at the ends in a similar way to a violin bass bar.
Dan has made many more than I have so maybe start without but just keep an eye on it.
Hope that helps.
John Maw writes-
(see a rather longwinded thread that I started on that subject here, but I have to warn you that it does go on a bit),
LOL, I cant believe you would send anyone there John, I thought that was a secret rambling thread saved just for a few complete nut bags like me........
Never braced, never will.... :o)
Ohhhh, Vinylhead, that is a nice box and a good find. Looks like a ply top, which is stronger and still sounds good. I've not braced a lot. Maybe an easy solution is to have parts of the neck support the top. Sure, you want the top to vibrate freely near the saddle, but on a box this size some strength in the center would help.
I like to strengthen the box, the corners always, often the whole sides if the wood is thin, I usually bolster both ends where the neck will sit.
Good wishes for a great build, process included.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans 5 hours ago. 6 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 8 hours ago. 4 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!