Replies to This Discussion

Permalink Reply by John Sawyer on December 25, 2014 at 7:13pm

Ugh.  And mine is getting dull... I was thinking of buying a new one!

• ▶ Reply

Permalink Reply by darryl kernaghan on December 26, 2014 at 4:03am

bottom line,look for a .023 kerf,it will be close,that is an imperial dimension b.t.w

• ▶ Reply

Permalink Reply by Pizza Wizard on February 21, 2015 at 5:06pm

Be careful when ordering the saw. There are 2 on harbor freight with the same description but they are different brands. I accidentally got the one made by portman and the frets were completely loose in the slots. I still used it but had to super glue every fret along the entire length. I am guessing the topman is the one you want.

Do NOT use this saw

http://www.harborfreight.com/12-in-flush-cut-saw-62118.html

• ▶ Reply

Permalink Reply by Dan Sleep on December 26, 2014 at 4:35am

If you plan on fretting a lot of necks, it might be worth it to bite the bullet and buy the Stew Mac fret saw with the depth stop on it. I bought one and I have never looked back.

http://www.stewmac.com/Luthier_Tools/Tools_by_Job/Fretting/Saws_and...

• ▶ Reply

Permalink Reply by darryl kernaghan on December 26, 2014 at 12:24pm

Wayfinder,you can drill your saw and attach a strip of teflon  or similar,just like the stewmac

• ▶ Reply

Permalink Reply by Dan Sleep on December 26, 2014 at 12:35pm

You could use a piece of hardwood too, like a scrap of maple or something.

• ▶ Reply

Permalink Reply by darryl kernaghan on December 26, 2014 at 1:39pm

a strip off a kitchen cutting board

• ▶ Reply

Permalink Reply by ChickenboneJohn on December 26, 2014 at 6:50pm

A fretting saw is one of those handtools that you simply need to get the right tool for the job and hang the expense, it will serve you well in the long run. Why waste $10-15 buying the wrong thing when for $30 you will be sorted for a long time? My first fretting saw lasted me around 250 fretboards before it became too blunt. At that price, and especially considering the "cost in use" it's hardly expensive. 

• ▶ Reply

Permalink Reply by John Sawyer on December 26, 2014 at 7:37pm

Valid point...  For me, I wasn't sure I'd stick with this hobby...  Now?  I wish  Stewmac made an indexed miter setup that would let me cut frets into a 1x2 neck...  then I could justify the saw/miter box/ scale combo...

For one who may or may not build more than 1-2, you can rack up a stack of expensive tools you'll never use, and a small saw is always useful...

• ▶ Reply

Permalink Reply by ChickenboneJohn on December 26, 2014 at 11:00pm

Making an indexed fretboard jig is one of the simplest cheapest things you can do to improve the accuracy and ease of making a slotted fretboard. Here's how to do it (using scrap timber..and a proper Sheffield-made fretting saw).

The difference between a "japanese style" saw and a real Japanese saw is immense. The sharpness, rigidity and temper of the blade results in a tool that is a pleasure to use. The same goes for most tools....buy wisely  - that doesn't necessarily mean spending a lot of money - secondhand planes and chisels (quality Sheffield UK or old USA made handtools) are usually really good value, combine that with a few well chosen quality new items and you'll have a selection of tools with are easy to use, will last a long time and won't break the bank.

• ▶ Reply

Permalink Reply by Randy S. Bretz on December 26, 2014 at 10:20pm

Ain`t nothin easier then doin slots the scroll saw method

• ▶ Reply

Permalink Reply by Randy S. Bretz on December 26, 2014 at 10:21pm

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• Next ›
• Page