Bought the Harbor Freight pull saw last week for fretting and it looks like the kerf is wider than the ones people have been using. The kerf is .032 now at least the tooth set is . The slot is too wide for the CB Gitty frets. Luckily I only did one before I noticed. Used my old Irwin it was pretty beat up but it still cut better than the HF one.

Views: 1992

Attachments:

Reply to This

Replies to This Discussion

Ugh.  And mine is getting dull... I was thinking of buying a new one!

bottom line,look for a .023 kerf,it will be close,that is an imperial dimension b.t.w

Be careful when ordering the saw. There are 2 on harbor freight with the same description but they are different brands. I accidentally got the one made by portman and the frets were completely loose in the slots. I still used it but had to super glue every fret along the entire length. I am guessing the topman is the one you want.

Do NOT use this saw

http://www.harborfreight.com/12-in-flush-cut-saw-62118.html

If you plan on fretting a lot of necks, it might be worth it to bite the bullet and buy the Stew Mac fret saw with the depth stop on it. I bought one and I have never looked back.

http://www.stewmac.com/Luthier_Tools/Tools_by_Job/Fretting/Saws_and...

Wayfinder,you can drill your saw and attach a strip of teflon  or similar,just like the stewmac

You could use a piece of hardwood too, like a scrap of maple or something.

a strip off a kitchen cutting board

A fretting saw is one of those handtools that you simply need to get the right tool for the job and hang the expense, it will serve you well in the long run. Why waste $10-15 buying the wrong thing when for $30 you will be sorted for a long time? My first fretting saw lasted me around 250 fretboards before it became too blunt. At that price, and especially considering the "cost in use" it's hardly expensive. 

Valid point...  For me, I wasn't sure I'd stick with this hobby...  Now?  I wish  Stewmac made an indexed miter setup that would let me cut frets into a 1x2 neck...  then I could justify the saw/miter box/ scale combo...

For one who may or may not build more than 1-2, you can rack up a stack of expensive tools you'll never use, and a small saw is always useful...

Making an indexed fretboard jig is one of the simplest cheapest things you can do to improve the accuracy and ease of making a slotted fretboard. Here's how to do it (using scrap timber..and a proper Sheffield-made fretting saw).

The difference between a "japanese style" saw and a real Japanese saw is immense. The sharpness, rigidity and temper of the blade results in a tool that is a pleasure to use. The same goes for most tools....buy wisely  - that doesn't necessarily mean spending a lot of money - secondhand planes and chisels (quality Sheffield UK or old USA made handtools) are usually really good value, combine that with a few well chosen quality new items and you'll have a selection of tools with are easy to use, will last a long time and won't break the bank.

Ain`t nothin easier then doin slots the scroll saw method

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->