I just build a bolt on neck guitar with the bolt on neck ,they sell here. After about a monthat after I build the thing. I have a nasty bow at the end of the neck ,that attaches to the box. Could it be the box? I did not reinforce the box. Do i need to do that?

Views: 246

Reply to This

Replies to This Discussion

If you put a straight edge on the neck you confirm the neck itself is ok or not. If the neck is ok then either the connection allows it to bend or the box is bending. But in general, even for a bolt on uke I would reinforce the box.

Hi, it would help to see the neck and the type of box. I build my own boxes so just have to brace the top and/or back. What is your box made of? is it a six string neck? what is the neck made of? 

The neck would normally bend in the middle of its length, if the string high spot is at the attachment area, I would look at the heal block [if any] and how secure the screws holding the neck are, or, is there enough backwards tilt of the neck out of the body. I have some actual cigar boxes that I would not use due to their weakness.

Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
18 minutes ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
30 minutes ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
3 hours ago
Wanhavihtahousu posted photos
4 hours ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
7 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"Oh, yea , I forgot they have an economy line made overseas? Lace in the US did a limited edition…"
12 hours ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
12 hours ago
Keith Rearick liked Gary O'slide's video
16 hours ago
Keith Rearick liked Poorness Studios's video
16 hours ago
Keith Rearick liked Mick Tickner's photo
16 hours ago
Keith Rearick liked Mick Tickner's photo
16 hours ago
Keith Rearick liked Mick Tickner's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->