Replies to This Discussion

Permalink Reply by Uncle John on August 9, 2011 at 1:50pm

That sounds right.  I have done 2 like that.  Check Lowe's page and ask questions.  Helpful guy.  I think you need a 7 inch or wider box.  Plenty strong on my builds.   For the biscuit/ saddle, I made oval wood biscuits with slots for the actual saddle and a dowel that goes into the center hole of the reso.

• ▶ Reply

Permalink Reply by Ben on August 10, 2011 at 2:10am

Sounds right to me. I haven't bought one yet but I remember when he first came out with them he posted a video showing how easy the installation was. I think it went like this: cut hole, place cone it hole, screw in place (but not too tight because you might warp it).

• ▶ Reply

Permalink Reply by David L. on August 10, 2011 at 2:56am

He has a how-to-video tucked away on his page

 

http://www.cigarboxnation.com/video/reso-cone-how-to-video

• ▶ Reply

Permalink Reply by Kyle on August 10, 2011 at 3:59pm

Thanks heaps guys much appreciated

David Lloyd said:

He has a how-to-video tucked away on his page

 

http://www.cigarboxnation.com/video/reso-cone-how-to-video

• ▶ Reply