hey all... seems i dont have a way to cut a clean, close and accurate straight line...
i was going to cut a practice "A" type strummer, cut strips up the bottom , looks like a fork.. know what i mean?
anyway, please read and if you know what might be the problem PLEASE REPLY. this could be a game ender for me as i planned to make a lot of my cuts wth this.
Heres the story:
Bandsaws...
I bought a 12" Craftsman bandsaw/sander. Has a 1/4" blade on it 4 or 5 tpi. 1/2 hp.
I need to use it t cut 1" thick maple by 2 inch. I have to cut a 1/8 strip straight down both sides, like legs, or like a fork. Understand?
So my blade guide has the wheel behind it top and bottom, and adjustible side posts or stops on both sides top and bottom... pretty standard. I made sure to loosen the blade side posts so it was free and then brought the posts in to about 1/32" away from the blade, both above and below the table. Everything spun smooth.
So, i measured for 1/8 cut from the side, set my fence and tightened it. Made sure blade, table and fence were all 90 degree angles. Turn on and start. First 1/2" down was fine, the rest kept tracking right off the side og the board, no matter how much i turned the wood to compensate.
When i looked at the blade turned off and wood not removed, the blade was seriously bend, pushed out frm the wood, as if the blade was trying to bend around the wood thickness. And yes, i even had the guard nearly ontop of the wood so it would not bow.
Not only that but where the cut was 1/8" from the side of the wood on top...the bottom of the wood was nearly cut through the side, like 1/32" from the side.
I tried freehand to follow a line 1/8 from the edge. Little better luck without the fence, but it verred off to the edge too and only slightly corrected if i turned the wood at almost 30 degree angle.
Understanding what im trying to explain?
I just dont understand what is screwd up here
Tags:
hey T-- i know, the thing is, we are talking 1/8 inch wide and 1 inch thick hard wood both sides. thats some serious cutting mate
and there are other cuts i want the bandsaw for.
if anyone can see whats wrong, please lmk
o
im slow to reply because i dont have my computer, just a small tablet.
thanks
jim
Band saws are notorious for wandering all over the place, but usually the wider the blade, the easier it is to keep it going straight. I have never been able to use a fence and have it work, I cut everything free hand.
The blade guides that ride on the side of the blades have to be positioned correctly. Close enough to the teeth without actually hitting them. And the tension on the blade has to be set right as well, you can't have it too loose.
Have you searched around the web for tutorials on setting up the saw correctly?
Yes, check the tension and check often. Blades tend to stretch as you use them. If your blade is loose- it will wander. Also go slow when you cut.
Wade
Google will save the day.
Google "how to set up a bandsaw".
Cured 94.3% of my trouble.
AFKAM
"I bought a 12" Craftsman bandsaw/sander."
Unfortunately, that's your problem right there. I have a similar small bandsaw which has a similiar problem. I googled how to set up a bandsaw too. What I came up with was use a bigger blade (3/8" is as big as mine will go) and tension the blade until it "sings" when you snap on it with your fingernail. It should sound kind of like a musical note or bell-like.This is a much higher tension than described in my bandsaw's instructions.
The best blade I've ever had for mine was a metal/wood blade which I got from McMaster Carr. Better than the wood blades from the local hardware store. It costs more and and unfortunately seems to break quicker, but everything is better cutting wise. You will still probably have to freehand the cuts without a fence and angle the wood to get a straight line.
Back when I was using bigger bandsaws in a pro shop (1/2" blades), wandering never seemed to be a problem and you could actually use a fence. A 1" board would cut like butter, whereas on the 12" saw it's a struggle.
When my current saw breaks, I will be purchasing a larger saw.
I'm no expert on badsaws, only having had one for a few months, but I have learned that even when they are set up pretty much bang-on they are still prone to "drift" -i.e. cutting at an angle on long rips (sounds like that's what you are experiencing) , and you may need to set the fence to compensate for this.
I had this when I set up my used 13" Record...I fiddled with the tension and guides had little improvement. I replaced the blade and that pretty much sorted it. A blunt or damaged blade (you only need to nick a nail when resawing old timber and that will harm the blade) really wont help. That's a pretty skinny blade for long true cuts..better for tight curves perhaps, but maybe a new 1/2" blade might be better?
Once I got my saw sorted I found it so useful. Tedious and inaccurate cuts with a handsaw were quick and clean with the bandsaw.
For the odd guitar, you really don't need a bandsaw...I built around 250 guitars without one, it just takes a little more time and effort doing it by hand. It's all too easy to rely on powertools, so personally, I'd learn to use handtools first before acquiring any big shop tools...proper hand-working skills will always be essential no matter how many powertools you've got.
Seems to me that 5tpi might be a little fine for cutting 1" thick material. A 3tpi would give you deeper gullets, and allow the sawdust to clear easier, which would affect the "thick to thin" problem you're having.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray yesterday. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes
© 2024 Created by Ben "C. B. Gitty" Baker.
Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!