I have a few Artero Fuente  boxes that have the pressed paper lids. I was wondering about using the bottom of the box for the sound board.  Being wood I'm thinking a richer tone woud be produced. Blind cutting the box for the neck might be challenging, but doable. I could also glue the lid in place to support the box and then cut free the bottom free so facilitate the build. Has anyone has flipped the box and used the bottom as the sound board? 

Views: 504

Reply to This

Replies to This Discussion

Cut the paper edge band with a razor blade. Slipped a razor knife in between the sides and the bottom. Located the staples and cut them free with a hacksaw blade. Glued and clamped the lid on and the box has been officially flipped.

Many have, it’s well known that the bottom of the box is thinner than the top? This gives you more vibratory response like other acoustic instruments? 

I flip most of mine because of non-wood tops and because I like being able to open the back to access the electronics when needed.

I am sure many a CBG have been built using the bottom as the top.

Here's one; a Padron box with the corners rounded & flipped to utilize the plain bottom.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 8 hours ago. 1 Reply

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

BrianQ. replied to Bill Andy's discussion Nut
"It’s customary to include a pic of the neck when you’re asking these kinds of…"
8 hours ago
BrianQ. liked Rob (Uker) Porras's photo
8 hours ago
Bill Andy posted a discussion

Nut

Just got a prefretted walnut neck, it does not have a lip to glue nut against, should i dado to set…See More
12 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
14 hours ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
15 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
15 hours ago
BrianQ. left a comment for Clydr
18 hours ago
BrianQ. left a comment for James C Bailey
18 hours ago
BrianQ. left a comment for Airam
18 hours ago
T-Gripped liked Dogleg Steve's video
18 hours ago
T-Gripped liked Gary O'slide's video
18 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Thanks. Ron.  I agree on the Padron boxes.  I think they are close to the best for looks…"
19 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->