Replies to This Discussion

Permalink Reply by BrianQ. on November 3, 2021 at 10:53am

The links are blank, you might want to try again? 

• ▶ Reply

Permalink Reply by Big D on November 3, 2021 at 11:15am

Google Drive:
https://drive.google.com/file/d/1SBDAmE_4BbHet_nnqqT_Sazh4BN5-K81/v...

https://drive.google.com/file/d/1A-386CDWfaGm58vLiN0O-3B5VAQu8JLf/v...

• ▶ Reply

Permalink Reply by BrianQ. on November 3, 2021 at 11:16am

Garry Rossington from Lynrd Skynrd used a bone to lift the strings on his Les Paul, I’ve tried it, it works?

• ▶ Reply

Permalink Reply by BrianQ. on November 3, 2021 at 11:33am

Forgot to add, the backside is hollowed out so it can be arched precisely over the fret? You could replicate with a piece of metal tubing?

• ▶ Reply

Permalink Reply by Big D on November 3, 2021 at 6:43pm

I changed the strings and moved the location of the bridge. I gave the tuners a good tight turn in the winder screw, ii’s probably the best thing I did that helped with tuning. They were pretty loose. 

It stays in tune a lot better, not perfect and not as close as I would like it to perfect but minimally plausible. I hope to improve that. 

I did cut and polish a screw to put behind the nut. It works really well but it did really mess with the intonation. It plays slide real good now tho. I definitely made some forward progress though. I really got to play it for about an hour tonight and that was nice. 

• ▶ Reply

Permalink Reply by the anonymous pick on November 3, 2021 at 7:22pm

Another option is .  if the "blade" on your bridge does not have grooves in it  for the strings to set in . . the strings may be sliding out of tune   from side to side . 

bottom line is . something is moving . 

 the solution is finding what it is .

good luck.

• ▶ Reply

Permalink Reply by Taffy Evans on November 3, 2021 at 8:20pm

Hi Big D, I do not know what is used behind the zero fret to space the strings, but if it is something with grooves in it make sure the grooves are not too narrow for the string. If they are you will have the string being in tune then slowly slip through and detune.
Also is the neck fitted firmly and not moving as you play.
AP's suggestion re grooves in the bridge saddle will eliminate string movement there, but also check at the nut, is there chance of string movement there.

To get good better intonation check by playing a string open then fretting it at the 12 fret, the note should be the same, only an octave diffferent. Move the bridge back or forwards to get it right.
Cheers Taff

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page