I have now filled a fourth box of short pieces from a inch or two up to maybe a foot. Any good ways to store these, or do you toss/burn them or do something else? They can always be used for a brace, a bridge or nut or whatever. I feel like a hoarder but I hate to toss them. As always, if this was discussed before sorry in advance.
Tags:
Here's the best way to cure the hording urge of leftover scrap and satisfy it at the same time, I'm the same way, but I don't usually hoard too much pine scrap except for the occasional piece saved to replace a worn out table saw push stick or a decent size piece used to free hand drill something on top of to prevent drill rip out when drill a through hole into something, otherwise all the pine goes on the fire pit, now hardwood scraps, I make all kinds of things from planters to picture frame to bird feeders or whatever, trick is, as soon as you get a decent small pile, take a break from the norm, use all the pieces you can some way, then the rest off to the burn pile and start again, think of how many hardwood 3-4-6 string bridges you can make, that's what I do with all my small leftover rosewood, build up stock to use or sell.
That's a good looking bridge.
I know a guy that makes Pens on his lathe.
I've used left over bits as bracing, kerfing, corner braces, bridge blocks, wings for headstocks, repair patches.
Large pieces for headstocks on scarf joint necks, headstock veneers, body wings/additions, mounting blocks, sanding blocks and radius sanding blocks.
Pretty simple actually, I had some 1/2" rosewood that I was cutting down for fret boards, took a piece of leftover scrap, before cutting it down to size, I set up the table saw to only cut approx 1/4" deep, ran the scrap through it to make the slot, then cut down my piece to size, used a sander to angle sand down the sides, followed by a drum sander to get it a little curvature on the sides, finish sanded everything smooth, done. Do this with any hardwood.
I save it all,use bits when I need to make a part or brace as you said. I'm also toying with the idea of making "negative space headstocks" out of the pieces I cut away shaping headstocks.
Great job on that Rose.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 11 hours ago. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!