Spend an afternoon making these bridges,better than using a bolt

1.The day before glue up a sandwich.These are 1/8" thick and 40mm. wide for 20mm. high bridges.The filling is 6mm. narrower

2.Mark out as shown

3.Using a 16mm. brad point bit drill until the point of the bit just comes through the under side,invert and drill through

4.Cut down the centre line and remove waste

5.Cut into lengths....lots of bridges

6.Bevel,radius or scallop the corners,sand varnish and add a saddle

Views: 436

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Jerry Jordan on May 11, 2017 at 12:15am

Thanks.,,.great technique .,.,.

Comment by Michael Fred Johnson on October 27, 2016 at 12:30am

Fomhorach,I'm intrigued,what problem has this solved?

Comment by Fomhorach on October 26, 2016 at 10:40am

I would never have thought of making saddles like this. It's a little like mass production. It must save lots of time.

But the sandwiching method has pinged out a solution to a problem I've been mulling over. Thanks :)

Comment by Primitive Acoustics on October 24, 2016 at 7:23am
Great looking bridge! Thanks for sharing your design.
Comment by Kigar on October 22, 2016 at 6:23am
Nice! You can use the tongue side as well without a separate saddle.

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

BrianQ. left a comment for Clydr
1 hour ago
BrianQ. left a comment for James C Bailey
1 hour ago
BrianQ. left a comment for Airam
1 hour ago
T-Gripped liked Dogleg Steve's video
1 hour ago
T-Gripped liked Gary O'slide's video
1 hour ago
Uncle John commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Thanks. Ron.  I agree on the Padron boxes.  I think they are close to the best for looks…"
2 hours ago
Bassdude updated their profile
4 hours ago
RON NORTHCUTT commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Nice looking collection, I just finished 2 with the padron boxes, they are among my faves. I have…"
4 hours ago
RON NORTHCUTT commented on Rich's photo
Thumbnail

Retro Tin tail piece view

"That is a super nice build. Everything about it looks great."
4 hours ago
Cigar Box Nation posted an event
Thumbnail

Cigar Box Nation: York PA - A CBG Builder's Meet-Up at York Town Craft Guild

May 11, 2024 from 1pm to 4pm
5 hours ago
Profile IconAiram, James C Bailey and Clydr joined Cigar Box Nation
5 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Thanks Glenn and Andries.  Andries, those cactus rock!"
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->