First off, I'm still a newbie 'round here and not sure if this should be a blog post instead. This is my first time starting a 'discussion'. I figure it's easier to reply here if someone has a question or new idea. So anyway...
I'm a tinkerer. I can't help it. I built one of the PVC racks that was posted here where the guitars sit on top of a dual rail with the necks hanging down. It worked great, but after a few months I wanted to try something different. Yesterday I was looking at it and thought, hey I could convert that to a leaning rack like 1 of those travel guitar cases. So today I went at it. I'm sooooo happy with it! Thought I'd share in case it helps someone else. If you build one, you don't have to follow my dimensions exactly. Do what's right for your needs, tweak it, make it better... But to get you started, here's the design I used.
Notice the front lower rail is higher than the back lower rail (only by 1 inch), but this makes the guitars lean back against the top rail. This is key! The gap between the 2 bottom rails allows your neck through tail to hang down.
At first I did a quick assembly without the elevated sides (they look like arms on a chair). It worked great, but I decided to put the sides on to prevent a cbg domino slide onto the floor if my crazy dogs rammed into it while wrestling.
The whole thing's made from 1/2" PVC. I inserted a 1/2" aluminum tube inside the front lower rail which bears all the weight to keep it from bowing. Works really well & keeps it light. I tried a dowel, but it didn't stop the bowing.
I ended up with a lot of extra PVC vs where I started from with my original hang down rack. Like I said, I liked that design, but I'm a tinkerer and wanted to mix it up. I have a feeling a lot of people around here are tinkerers too! :)
Hope this helps!
Tags:
Nicely done Janis. The store bought one similar to this that I use was around $50. I like yours better!
Thank you Jim! I'm really happy with how well this works and how stable it is.
This is very cool, thanks for sharing
First, Thank you. I followed your design and I'm very happy with the rack. Mine seems to be strong enough without the support rod (truth be known, I accidently forgot to install, during assembly). I'll be using mine at our club meetings for display purposes and at home. I'll probably print up some copies of the plans for club members too. KUDOS!!!
Aw, Preston, I can't tell you how happy it makes me to hear that! I'm so glad you like your build. Hope the folks in your club like it too! Let me know if y'all come up with some good mods for it.
very innovative.love it
Thanks Vinnie! :)
Nice work. The aluminum rod through the bottom support was a clever solution.
And a hearty War Eagle. (EE '93) :)
Dude, War Eagle Lane! We came close to crossing paths - I'm Chem E '98.
I have all kinds of materials laying around. I was really pleased that stock aluminum tube fit the bill perfectly.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 12 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 13 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!