Replies to This Discussion

Permalink Reply by ChickenboneJohn on February 4, 2016 at 7:52am

I make custom cases, but I'm in the UK, so shipping and will probably make it too expensive....but here's what I make...

Here's the inside of a matching  pair...

• ▶ Reply

Permalink Reply by Dan Sleep on February 4, 2016 at 12:01pm

Nice work my friend!!

• ▶ Reply

Permalink Reply by Nathan Binns on February 6, 2016 at 12:39pm

Gorgeous cases. If you don't mind my asking, how much do you sell these for? I was considering making a couple of these for my nicer builds, but it'd cost about $60 just for the materials. The fabric and tolex make up most of the cost.

• ▶ Reply

Permalink Reply by gary herget on February 7, 2016 at 5:15am

My experience building cases is that you spend more than you do building a guitar. Maybe try to find a baritone uke case if there is such a thing. the 24' might fit there.

• ▶ Reply

Permalink Reply by Dan Sleep on February 7, 2016 at 7:04am

Thanks!

• ▶ Reply

Permalink Reply by Mike Trobaugh on February 10, 2016 at 10:04am

https://www.bohemianguitars.com/boho-series-hard-case

If yur in the states this might work

• ▶ Reply

Permalink Reply by Dan Sleep on February 10, 2016 at 3:00pm

Did not know about that one. Thanks

• ▶ Reply

Permalink Reply by jim on February 10, 2016 at 9:09pm

I'm a hard case........

• ▶ Reply

Permalink Reply by jim on February 12, 2016 at 8:40pm

https://www.skeleton-factory.com/coffin-c-100221?gdftrk=gdfV213095_...

• ▶ Reply

Permalink Reply by Bristol Blue on February 13, 2016 at 5:47pm

Contact that Jamie MacBlues ... Loadsa hard cases in Glesca lol ;-)

• ▶ Reply