Tags:
????? This site only works for me half the time.....
Anyway.
Howdy Nation.
For those of you who make radius fretboards. Will I need to curve the fret wire? If so how?
Thanks!
Cause the Rat
A radius in the fret wire will keep the ends from trying to pull out of the fret slot. You can make a diy fret bender. There is a video on utube that I followed to make mine and it works great. Here is a link https://www.youtube.com/watch?v=4_DWA-gBAUk
To make sure it fits snug and stays put, you can carefully bending it by holding the tang with pliers, and bending the wire a bit.
The pros have a tool that does this, but im sure it can be done by hand. Maybe build a jig to form it to. hammer it down a bit.
http://www.cigarboxnation.com/photo/fretwire-bender-mk1-2?xg_source...
Awesome! Thanks for the help! Looks like I need to find where I can get the stuff to make a fret bender.
Lot of good posts here, let me give another perspective. I looked into buying fretwire benders, DIY ones from lowes, all that. Then I slapped myself and realized you can buy radiused fretwire and it doesn't cost that much more. I radius by hand by sanding and the pre-bent wire it works like a dream on it. the wire is radius tighter than the board and that's a good thing, as it seats the fret much better and keeps it there. Often it seats so well and consistently that I don't have to level the frets anymore. I use a very light hammer and put 4-5 strips of masking tape over the business end and it works fine. Good luck however you choose.
Totally awesome Nation! Thanks for all the response!
I get my fret wire in rolls http://m.ebay.com.au/itm/281230885021?nav=SEARCH and put it on flat fret boards. I always put a drop of superglue on the ends as well just in case.
I did read one "tip" that recommended using over radiused fret wire by hammering in either end and then hammering home the middle, which is supposed to shift the retaining tangs sideways a bit and make them harder to pull up. Sounds like an over analysed and only faintly plausible justification but I do it anyway and it seems to do no harm.
Yes it does work on a radius fretboard. i saw one or two tutorials as well, This site has good articles http://www.vipcubancigars.com/blog/
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 10 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 10 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!