Replies to This Discussion

Permalink Reply by Ben on August 19, 2011 at 9:40am

This may be an obvious answer, but it is what I did when I was experimenting with 3 strings while in the process of building my first. Do what you said but leave all 6 strings on the guitar and just play those 3. Or, if you really want only 3, take the others off and just leave those 3 where they'd normally be.

• ▶ Reply

Permalink Reply by John Stevenson on August 19, 2011 at 3:01pm

I have my Epiphone hollow body tuned to EBEBee presently.  Kinda stupid, but lots of fun with a slide and the amp cranked up.  The small strings ee give a nice treble chorus sound. john

• ▶ Reply

Permalink Reply by Dan Sleep on August 19, 2011 at 11:15pm

It works for Seasick Steve.

 

http://www.youtube.com/watch?v=pNoPNC3ebYQ

 

• ▶ Reply

Permalink Reply by Mark Milam on August 20, 2011 at 3:54am

Yeah!! Dats what I'm Talkin' bout!! :D  Think I may go to the pawn shop and pick up a cheap electric just to play with it with 3 strings..

• ▶ Reply

Permalink Reply by The Professor on August 20, 2011 at 8:32am

Not difficult. Take off the 1st 2nd and 6th string, Tune it it G A G and you will be flying.

• ▶ Reply

Permalink Reply by Keni Lee Burgess on August 21, 2011 at 1:43am

Well, it seems you got your answer, but I will add a little more.

Using standard strings ADg and tuning GDg is just part of the full 6 string Open G tuning (DGDgbd). On my instructional video CD 4, I teach GDg tuning for 3 string, on CD 5, I teach Dgbd tuning for 4 string, and on CD 2, I teach DGDgbd tuning for 6 string. Do you see the similarities? Once you understand the relationships between the strings, it does not matter how many strings are on your instrument. You can apply this knowledge to banjo using the traditional bluegrass tuning (gDgbd) because actually it is Open G tuning too. I hope you find this information helpful. Enjoy your practice, Keni Lee   

• ▶ Reply

Permalink Reply by Mark Milam on August 21, 2011 at 5:55am

Keni Lee Burgess said:

Well, it seems you got your answer, but I will add a little more.

Using standard strings ADg and tuning GDg is just part of the full 6 string Open G tuning (DGDgbd). On my instructional video CD 4, I teach GDg tuning for 3 string, on CD 5, I teach Dgbd tuning for 4 string, and on CD 2, I teach DGDgbd tuning for 6 string. Do you see the similarities? Once you understand the relationships between the strings, it does not matter how many strings are on your instrument. You can apply this knowledge to banjo using the traditional bluegrass tuning (gDgbd) because actually it is Open G tuning too. I hope you find this information helpful. Enjoy your practice, Keni Lee   

 

Thanks Keni,

I did order your CD yesterday...maybe then I'll see the relationship between the strings, but trying to remember them maybe something harder..LOL....But I'm going to try anyway I did get "Bad to the Bone" down pretty good, at least my wife said, "Finally, you can play a fricking Song" LOL.  

• ▶ Reply

Permalink Reply by Keni Lee Burgess on August 21, 2011 at 8:40am

Thank you Mark for your purchase.

Well it is not anything too complicated. Very basic theory to help you undertand and map out the fingerboard.

I believe the CD will make things clearer for you. 

Please feel free to write if any questions arise as you work through the lessons.

The more songs and musical ideas you learn in GDg tuning the easier it will become.

Be patient and think of learning as an adventure searching for buried treasure. You might have to dig a lot of holes and at the time you may think they were unnecessary, but really each hole gets you closer to the prize.

Above all enjoy your practice, Keni Lee  
Mark Milam said:

Keni Lee Burgess said:

Well, it seems you got your answer, but I will add a little more.

Using standard strings ADg and tuning GDg is just part of the full 6 string Open G tuning (DGDgbd). On my instructional video CD 4, I teach GDg tuning for 3 string, on CD 5, I teach Dgbd tuning for 4 string, and on CD 2, I teach DGDgbd tuning for 6 string. Do you see the similarities? Once you understand the relationships between the strings, it does not matter how many strings are on your instrument. You can apply this knowledge to banjo using the traditional bluegrass tuning (gDgbd) because actually it is Open G tuning too. I hope you find this information helpful. Enjoy your practice, Keni Lee   

 

Thanks Keni,

I did order your CD yesterday...maybe then I'll see the relationship between the strings, but trying to remember them maybe something harder..LOL....But I'm going to try anyway I did get "Bad to the Bone" down pretty good, at least my wife said, "Finally, you can play a fricking Song" LOL.  

• ▶ Reply