Replies to This Discussion

Permalink Reply by JP Lace Master on October 14, 2017 at 2:51am

Hello Bryan, lets start with the dowel rod neck. a 1 inch Dia will just about do it, but may I suggest a 1 1/8, more space for the machine head. Speaking of the machine head, make sure you drill the hole for it carefully, otherwise you will find positioning it properly to be a real pain.

As for cutting the tin. you need a power drill with a 10mm bit and a dremel with a cutting disc bit. Drill 3 holes in a trianglular pattern in the side of the tin where you want the neck to go with the drill then use the dremel to cutting out the rest. Make it so that the cut edges of the tin grip onto the neck slightly as its slid into the tin.

Assuming the tin is not large the structure of the tin will hold itself together as you drill, plus keeping the lid on the tin as you cut helps it hold its shape.

I hope you find this useful. Also, is the look of your going for for your Diddley bow, somehing like this:

• ▶ Reply

Permalink Reply by Bluesheart on October 14, 2017 at 2:56am

I think you could use a metal cutting hole saw on a drill and just back up the tin inside with a wood block(may have to grind it to the shape of the tin) to keep it from crushing and get a nice clean cut. Wear gloves!

• ▶ Reply

Permalink Reply by John Sawyer on October 14, 2017 at 3:10am

Either a metal hole saw, but a UniBit or step drill is better... 

These work really well on sheet metal:  https://www.harborfreight.com/2-piece-titanium-nitride-coated-high-...

I use a drill press... Take a black sharpie and mark the step you want... it erases with alcohol..

• ▶ Reply

Permalink Reply by Bryan on October 15, 2017 at 12:36am

Thanks for the replies and tips, gang!  I will look into the mentioned tooling.

Great photo and excellent looking builds, JP!  I mentioned the 1" dia dowel rod as that is what I started with from my C.B. Gitty diddley bow kit from my first build.  It seems to work fine for the one geared tuner.  However, I do think a slightly larger diameter dowel rod might feel nicer in the hand when playing guitar style and not lap style.  I've also been wanting to build a two string - in which case I will use a 1" x 2" for the neck.

• ▶ Reply