Replies to This Discussion

Permalink Reply by Cause the Blue rat on December 13, 2016 at 6:21pm

OK I want to try this before I say anything

this first pic is of the fake feather tree

The second picture of of the same tree covered in antiques. The horn candle holders are from around 1870.

It works! What I have to do is type all my text in first. Then leave spaces between each text section by hitting enter a few times ( I'm on a mac ) Drop the photos between the text lines. Then where i want to drop the last picture I make sure I've hit ender several more times after the last text line. This allows me space to type below the last photo.

Then go in and clean up the blank areas if you have any. Hope this helps.

• ▶ Reply

Permalink Reply by JL on December 14, 2016 at 1:21am

What I do to keep pictures from going to the top of a post:

type some text, click that HTML button, position the cursor and insert a picture, click it again to get back to normal editing.  repeat as needed.

• ▶ Reply

Permalink Reply by Taffy Evans on December 14, 2016 at 9:55am

Thanks guys I'll give that a go when I get time.
Taff.

• ▶ Reply