Replies to This Discussion

Permalink Reply by Kigar on March 14, 2016 at 3:57pm

My bandsaw did ok with a coarse blade on oak flooring, but I know what you mean, sometimes the wood just does not want to be cut.

• ▶ Reply

Permalink Reply by BP - RabidSalad - on March 14, 2016 at 4:22am

The cheapest source for hardwoods for me is....  pallets.  I have a standing request at the local hardware store that is different from most in that they buy from all over the world. The owners get product not only from their chain outlet but from buying shows as well. 

Bottom line is when pallets arrive from certain places in the USA I get oak, When pottery arrives from Malaysia I get teak and mahogany, so heads up in spring time.  Anything spuce/pine from N America I ignore, obviously.  I like the fact that the wood has character with dark staining and nail holes which I try to incorporate into the build.

happy cbg'n

• ▶ Reply

Permalink Reply by John Sawyer on March 14, 2016 at 11:29am

I have given up (mostly) on poplar in favor of maple, but I do spend a lot of time at Home Depot digging through and finding pieces that are straight (on one end), then I get as many as I can.

For finger boards, I found a local hardwood floor reseller that has 1/4" thick pieces. I have walnut, Purple Heart, Jatoba, and lacewood that all make beautiful guitars. I buy large (~10"x 4'-6')end-pieces and trim them down on the table saw... For $50 in wood, I get 30 or so finger boards... My local hardwood store has a variety of woods: Sipo, zebra, maple, and more). If you can find Jatoba, you have to give it a try... It is amazingly strong, and looks great.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page