Replies to This Discussion

Permalink Reply by Karmakaze on April 3, 2014 at 8:26am

Go to Seymour Duncan's web site.  They have printable and easy-to-read circuit diagrams for every configuration you can think of.

• ▶ Reply

Permalink Reply by matt g on April 3, 2014 at 8:28am

I looked at their stuff, and all of their 2-humbucker diagrams have a switch in them. I'm wondering if it's possible to skip the switch.

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on April 3, 2014 at 8:38am

yes, can omit the switch, instead using two volume pots and one tone pot...Karma is right, SD has diagrams

• ▶ Reply

Permalink Reply by The Capo Kid on April 3, 2014 at 9:29am

 Yes your diagram is fine if your using mag pups but the tone won't work with a piezo , you could lose the tone pot and add a blend pot , just have one vol and a blend pot that way you could use one humbucker and a piezo  , there are 2 types of blend pot , one is front pup middle pos is 100% both pups and right round the other way the other pup , and the other type is the same but middle pos is 70% both pups .

• ▶ Reply