Just finished the construction on my first box..3 string..Im not a musician,what strings are best to use? For the blues? Which 3 should i use? Any help is appreciated..

 

Rob

Views: 225

Reply to This

Replies to This Discussion

First things first...does this guitar have a pick-up (mag. or piezo?) or is it acoustic? If its acoustic, or my preference for piezo, use a standard set of acoustic strings. I've been liking the Martins but I'm sure everyone will give you their tip on where you can buy strings for .002% cheaper than the guy before them said. Just use what you can find at the guitar shop for the moment. When you go into mass production mode you can worry about the .002% cost difference. Light weight would probably be a good choice. Then if you're looking for a pretty standard strummy type thing, go with the 5th, 4th, and 3rd strings (A, D, and G) and tune the A string down to G so you have G, D, and g. This will give you a good place to start from. If you're using an magnetic pick-up, all the same applies just buy electric strings. For future reference, or to find a thousand different answers from mine, use the search box at the top of the page. I'm sure a search for things like "strings, gauges, tuning" would turn up 1.2 billion results.
Ben
Im sorry,yes it has a piezo pick up..Thanks ill look into your advice and also check the search box.
Appreciate the time.
Rob


Ben said:
First things first...does this guitar have a pick-up (mag. or piezo?) or is it acoustic? If its acoustic, or my preference for piezo, use a standard set of acoustic strings. I've been liking the Martins but I'm sure everyone will give you their tip on where you can buy strings for .002% cheaper than the guy before them said. Just use what you can find at the guitar shop for the moment. When you go into mass production mode you can worry about the .002% cost difference. Light weight would probably be a good choice. Then if you're looking for a pretty standard strummy type thing, go with the 5th, 4th, and 3rd strings (A, D, and G) and tune the A string down to G so you have G, D, and g. This will give you a good place to start from. If you're using an magnetic pick-up, all the same applies just buy electric strings. For future reference, or to find a thousand different answers from mine, use the search box at the top of the page. I'm sure a search for things like "strings, gauges, tuning" would turn up 1.2 billion results.
If you are looking for info on what gauge/size to use, if you know your scale length you can use this:

http://www.strothers.com/string_choice.htm
Thanks Diane,ill check that out also..
Rob

Diane in Chicago said:
If you are looking for info on what gauge/size to use, if you know your scale length you can use this:

http://www.strothers.com/string_choice.htm
I use the #3, #4, #5 strings out of a normal pack of Acoustic strings, and tune them G, D, g. The cheapos at wal-mart are around 4 bucks a pack and have served well.
Thank you.

Jkevn said:
I use the #3, #4, #5 strings out of a normal pack of Acoustic strings, and tune them G, D, g. The cheapos at wal-mart are around 4 bucks a pack and have served well.
I too agree that the A,D and G strings are a very good place to start .With the A tuned down to G .
I'm glad you got your 1st CBG under your belt almost ,And I bet your already thinking about your next one.
The folks here are a wealth of information ,so dont be shy about asking questions.We all start somewhere and I ask questions all the time.
Welcome to the club!
Like another follow said I too use the cheapo strings from walmart.Using the A,D and G strings on 3 strings and I use the small E on my 1 stringers.Now if I just could come up with a use for the low E string I'd be set,,,
Thanks alot Roger..Yeah already trying to picture my second one already..hahaa


Roger Martin said:
I too agree that the A,D and G strings are a very good place to start .With the A tuned down to G .
I'm glad you got your 1st CBG under your belt almost ,And I bet your already thinking about your next one.
The folks here are a wealth of information ,so dont be shy about asking questions.We all start somewhere and I ask questions all the time.
Welcome to the club!
Like another follow said I too use the cheapo strings from walmart.Using the A,D and G strings on 3 strings and I use the small E on my 1 stringers.Now if I just could come up with a use for the low E string I'd be set,,,
Keni Lee,thanks alot!!

Keni Lee Burgess said:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 43 minutes ago. 4 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Cigar Box Nation's event was featured
Thumbnail

Cigar Box Nation: York PA - A CBG Builder's Meet-Up at York Town Craft Guild

May 11, 2024 from 1pm to 4pm
11 minutes ago
Bill Andy replied to Bill Andy's discussion Nut
"Also, do I need to ground the strings? Is there a way without soldering? Thanks"
43 minutes ago
Bill Andy replied to Bill Andy's discussion Nut
"Yes it is a Gitty neck."
49 minutes ago
Southern Ray replied to Bill Andy's discussion Nut
" Or, if you have no way of sending a picture, is it perhaps a CB Gitty fretted neck?"
1 hour ago
Southern Ray commented on Cigar Box Nation's event Cigar Box Nation: York PA - A CBG Builder's Meet-Up
" I'd love to attend, but will never be that far north-east. To those that can: Have…"
1 hour ago
BrianQ. replied to Bill Andy's discussion Nut
"It’s customary to include a pic of the neck when you’re asking these kinds of…"
14 hours ago
BrianQ. liked Rob (Uker) Porras's photo
14 hours ago
Bill Andy posted a discussion

Nut

Just got a prefretted walnut neck, it does not have a lip to glue nut against, should i dado to set…See More
18 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
20 hours ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
20 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
21 hours ago
BrianQ. left a comment for Clydr
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->