Tags:
If you look at my videos on my profile page here, you will see some basic neck layout and fretting guides for beginners. That should help you out.
If you download the Wfet program (I have a link to it on my blog page here) you can print out a paper template that will tell you where to put the frets.
so you are making a standard Ukulele? 12 frets? I copied this from the Stewmac site which has a fine "fret position calculator" (just google those words). here's your measurements for a 12" long 12 fretted Uke. The 12 inches are measured from the nut (the bar the strings go over just after the tuners) and the bridge (the bar near the bottom of the body of the Uke, about 2/3 of the way down the body). You should measure the distances from the nut. It's in inches, but 0.674 can be hard to figure out on a tape measure with 8th of inches displayed. Just convert them, .674 is 674/1000. Converting that to 8ths you just 674/1000 = x/8 or x = 674x8/1000 or x = 5.392. so 5.392/8ths. Realistically you just measure a little less than 5 and one half 8ths of an inch. I can convert the rest for you if you want.
Fretting with real frets should be done with a fretting saw, which are about $35 at stew macs. As an alternative I've glued nail braids (very thin nails) into shallow cuts and been successful also. Use super glue. Mark the fret lines with a t-square and pencil and then either glue the braids on the mark or make a small shallow cut with a saw to help seat the braids before you glue. Keep in mind the cuts have to be exactly the same depth. I used a circular saw with a depth adjustment tightened on about 1/8 of an inch deep, so maybe you just glue them on the marks. Be careful!
You are a good mom. I wish you luck
|
24" scale...
opps, so I should never respond to serious questions while watching hockey on TV. I think the further information says what i should have. sorry about that
Hi Amy,
Some good advice here already, but a couple of extra pointers:
Most folks around here use the fret position calculator on StewMac: http://www.stewmac.com/freeinfo/Fretting/i-fretcalc.html
If the distance from the nut to the bridge is 24" this is your scale length. However most would recommend converting this into millimetres as they are easier to measure. I clamp a metre ruler to the fretboard, with the start resting exactly at the start of the fretboard, then follow the measurements from the nut on the calculator. (Always measure from the nut, not fret to fret).
I then use a square to mark the lines on the fretboard and double check the fret positions.
Then use a craft knife to score the fret lines (using a square again).
Then use a mitre box and fret slotting saw (this is a must... probably the only specific guitar making tool you need) to cut the slots.
If you have any more questions we're always happy to help.
You folks are terrific! I will post a photo when we are done. That fret saw is way cool, but not sure I will get it in time.
To answer your question, Comrade, we are going to string it up CGCD or maybe CGCD#. I want my son to be able to play it easily. I was going to put a piezo in it, but we cut that hole b4 I found this site. : (
If you want an easy-to-play stringed instrument for a child to learn to play, then consider making a stick dulcimer instrument which is basically a CBG with a diatonic fretboard (7 notes per octive and no accidentals). With one exception, this diatonic scale is like playing with just the white keys on a piano in the Key of C (no flats or sharps to mess you up).
[The one exception is fret 6 (which is a flat when viewed from the perspective of a Major scale, and from this perspective fret 6+ (fret six and a half) is the correction needed to make that screwy mountain style Mixolydian scale work right with civilized major scale songs.) We can talk about this exception more if you like another time.]
Here is a diagram I did a while back that picks out the frets on a standard guitar that you will need to make a diatonic stick dulcimer instrument.
You may also want to consider making a shorter scale length, maybe 20" or 18" instead of 24" - 25.5" of a standard guitar. And nylon string (ukulele or classical guitar strings) are a lot easier on the kids fingers as they haven't developed hard skin (callouses) that come with years playing steel stringed instruments.
-Rand.
I dunno, it looks pretty good for a first attempt. Is suspect the buzz is coming from the lack of break angle at the lego. The height of the tailpiece looks like it is almost the same at the bridge, so the strings aren't putting enough downward pressure on the bridge.
But I bet he had a blast building it.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans 3 hours ago. 6 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 7 hours ago. 4 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!