Replies to This Discussion

Permalink Reply by Timothy on June 28, 2012 at 9:09am

I think its all a matter of personal preference. I.E. What your style is, or what you like. You should probably put it somewhere where it won't rub off easily, like the inside or tailstock. But most importantly give it that personal touch, that shows you put some of your soul into it that way the instrument is unique; its as good as any serial number ever would be.

• ▶ Reply

Permalink Reply by Peter Greed on July 12, 2012 at 12:33pm

I know of other git builders that write messages
inside the body, some inspirational others like ‘if you are reading this
something has gone horribly wrong’ could be fun.

• ▶ Reply

Permalink Reply by Clock The Wolf on July 12, 2012 at 12:49pm

• ▶ Reply

Permalink Reply by Suspect Device on July 12, 2012 at 2:10pm

Sometimes I write stuff like "Stay out of here, you!", other times I just draw a dirty picture. Then I glue that sumbitch up tight!

• ▶ Reply

Permalink Reply by Jason Dean Anderson on July 12, 2012 at 10:27am

my dad carves a tiki into the heel of the neck on all his builds...

• ▶ Reply

Permalink Reply by Bluesheart on July 26, 2012 at 11:37am

I have a logo my wife drew for me that I burn into the instrument somewhere. It does not really tell you where it came from but is sort of a "trademark". I usually sign them too and date.

• ▶ Reply

Permalink Reply by Bluesheart on July 26, 2012 at 11:46am

They may also contain blood, sweat and tears,
depending on the build!

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page