Comment

Comment by Ted Kaczynski on November 10, 2010 at 11:14am

got that dont reach he neck dont work best thins ive found so far is wet tile saw zip zip

Comment by dogfinger steve on November 10, 2010 at 10:13am

cheers for that... cool :0)

Comment by Bluesheart on November 5, 2010 at 2:31am

NIce work! Thanks for the lesson.

Comment by Roosterman on November 4, 2010 at 8:27am

Thanks for posting Norm - certainly less messy than my tile cutter method!!

Comment by smojo on November 4, 2010 at 2:18am

Good vid. I've done my own bottlenecks in a similar way but instead of hot water, use a candle and turn the bottle a couple of times with the flame under the cut, then pour cold water over. Works 9 out of 10 times. The main thing is getting that clean cut to start with. I made a similar device to his and that made the big difference.

Comment by Mike Willmouth on November 4, 2010 at 2:16am

Also, here is the forum that this was discussed on earlier:

http://www.cigarboxnation.com/forum/topics/how-do-i-make-slides?com...

Comment by Mike Willmouth on November 4, 2010 at 2:15am

OR you can used a Dremel tool with a diamond cutting blade OR a Tile Saw with a Diamond Blade.

Here is a link that you can go to for cutting bottles with a tile saw:

http://www.instructables.com/id/How-to-use-a-wet-tile-saw-to-cut-gl...