I saw a question on here by Jerry Gibson regarding surface pickup too high and thought I would explain the problem and the possible solution.

The issue is I suspect that the bridge is too low, the action may be correct as that applies to string height over the fingerboard.

The remedy is to raise the bridge to get the clearance needed, then adjust the neck angle to get the desired string action over the fingerboard.

Or instead of angelling the neck, raise it so it is higher above the surface of the top. this will also give a better break angle off the back of the bridge.

Hope this helps. Taff

Views: 264

Reply to This

Replies to This Discussion

On the topic of Flatpup’s, I like to build mine with the fretboard positioned 1/4” above the box. Flatpup’s are 1/4” tall, so the strings will have enough clearance to still have a somewhat lower action, granted the bridge is tall enough like you said Taff? Good luck mr. Jerry

Thank you taff and Ryan that was very helpful

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 17 minutes ago. 4 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Bill Andy replied to Bill Andy's discussion Nut
"Also, do I need to ground the strings? Is there a way without soldering? Thanks"
17 minutes ago
Bill Andy replied to Bill Andy's discussion Nut
"Yes it is a Gitty neck."
23 minutes ago
Southern Ray replied to Bill Andy's discussion Nut
" Or, if you have no way of sending a picture, is it perhaps a CB Gitty fretted neck?"
53 minutes ago
Southern Ray commented on Cigar Box Nation's event Cigar Box Nation: York PA - A CBG Builder's Meet-Up
" I'd love to attend, but will never be that far north-east. To those that can: Have…"
59 minutes ago
BrianQ. replied to Bill Andy's discussion Nut
"It’s customary to include a pic of the neck when you’re asking these kinds of…"
13 hours ago
BrianQ. liked Rob (Uker) Porras's photo
13 hours ago
Bill Andy posted a discussion

Nut

Just got a prefretted walnut neck, it does not have a lip to glue nut against, should i dado to set…See More
17 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanx A.D." I tried slowing down the number of builds, but I enjoy it too much! :-)"
20 hours ago
Rob (Uker) Porras posted a photo

Soresto ukulele

My wife actually asked me to build this. Every time the dog gets a new collar she tries to find a…
20 hours ago
3 String Blues posted a video

Delta Blues Freestyle Slide - MXL 990 Microphone Recording

Recorded with a MXL 990 Microphone that I bought used off ebay for 40 bucks. Music - from the webpage https://www.reddogguitars.com There is CBGs for sale...
20 hours ago
BrianQ. left a comment for Clydr
23 hours ago
BrianQ. left a comment for James C Bailey
23 hours ago

Music

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->