here she  is folks.

the wood I bought from crete while on hols.I saw the shape and I knew I had to have it.

so in preparation I got the holes drilled out etc ready for the flat pup and jack etc.

neck was already prepared and then glued the black walnut fret board ,then after put frets in and dressed etc.

the back I planed and glued black walnut pieces to the side of the ash wood.

dressed the sides etc and styled the end bits on my sander,put a grove in for the wires to sit in.

glued that bit to the back of the neck and to keep it in place while it dries I used a brass coloured screw.

put the pickup wires through the holes to the jack and soldered them on.assembled it altogether.

once that was done I partially glued the back on and put two brass coloured screw's.

fitted tuners in,these did have skulls on but didn't like the finish on them (scratched)

the rest is self explanatory .

oh and I made the brass pick up cover and drilled the holes to cover the holes I had some carbon fibre lookalike sheets.

to see how I drilled the holes see here..............

http://www.cigarboxnation.com/forum/topics/3-strings-question

Views: 1044

Attachments:

Reply to This

Replies to This Discussion

If your nut is extra high,that might be he whole problem John,good luck

Great looking Git John. Fun seeing a piece of wood with potential and bringing it to life. Enjoyed hearing the details on how you built it too.

Wow, very cool, love the wood and all the brass stuff, great pickup!

ah but the strings are gold plated! lol.

it sound meaty seeing that I've used these(6,5,4 strings) see below.

sorry I can't load up etc and I've yet to learn to play.

http://www.ebay.co.uk/itm/131553882465?_trksid=p2057872.m2749.l2649...

If your nut is extra high,that might be he whole problem

yep I think that is the problem it is 4mm high at the nut and 5mm at the 12th fret.

so this is something that I'm going to have to remember in my future builds.

you never stop learning that's for sure.

 

great John,get that nut as low as you can,if not for slide,same height as the frets,or a whisker higher if need be,then adjust your bridge to suit,at least then everything goes UP from your fretting point

I had two guitars that had frets that wasn't set right.

on the 1st accousting the bridge was to low.

put a blob of hot glue on either of the wooden bridge and that was soon sorted.

the olive guitar I got the strings at the nut 1mm high and on the 12th fret just a little higher than two mm and all is fine

the hard tail bridge I put a piece of dressed walnut wood underneath it about 3mm thick.

so all is well now

Attachments:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

AGP # commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

""Thanx A.D." Yep!, Messrs Waters & Gilmore don't seem to be friends anymore :-D"
1 hour ago
AGP # commented on AGP #'s photo
1 hour ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #532 - '' Black Sabbath''

""Thanks Doug", One more to go, a bit smaller Sign 6" x 12", and not Band…"
1 hour ago
AGP # commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

""Thanks  'UJ' & Doug", now have Eleven 8 Stand Carousels, all on…"
1 hour ago
A.D.EKER commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"Oke ! Rock Caktus ! i got Ye ! Watersavers! and still Cool !"
3 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

"The Metal Corner ! fine looking stand & Gits there AGP# ,Still cranking them out like there…"
3 hours ago
A.D.EKER commented on Rich's photo
Thumbnail

Retro Radio Tin Whole view

"Verry Cool Rich ! real good looker ! and a fine player ! Rock&Roll Radio !"
3 hours ago
Glenn Kaiser commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"I love Doug's work too!! -Glenn"
3 hours ago
Glenn Kaiser commented on Uncle John's photo
Thumbnail

Chugger Review 2nd from left

"ALL really sweet Uncle John! Congrats! -Glenn"
3 hours ago
Doug Thorsvik commented on Dogleg Steve's video
Thumbnail

Dead Mans Rag from the book Cigar Box Picking Rags for 3&4 string Cigar Box Guitar by Dogleg Steve

"Very jaunty Steve! It’s a treat to watch you play. Thanks for sharing."
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP 8 Stand Carousels

"Look at all those tin soldiers at attention! Nice way to show them off Alan."
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #532 - '' Black Sabbath''

"Another build to show off your metal Alan! I can tell you are having fun and coming down the home…"
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->