Replies to This Discussion

Permalink Reply by Taffy Evans on January 14, 2022 at 11:22pm

Hi, or you could put a capo at the 25" scale fret and tune GDG with normal gauge strings. I would be guessing as to what strings would work best. The gauges used for a longneck Banjo might be worth looking. But I'm sure someone here knows more than me.
Taff

• ▶ Reply

Permalink Reply by BrianQ. on January 15, 2022 at 7:11am

First of all, that’s a Baritone scale length, which purpose is to achieve a lower timbre than a standard cbg & demands larger strings? What gauges of strings are you using & are you experiencing String breakage tuning to pitch? Also, what is your method of tuning, by ear or are you using a tuner & what type of tuner are you using, clip-on, standard electric, online, Etc.?

• ▶ Reply

Permalink Reply by BrianQ. on January 15, 2022 at 1:46pm

Forgot to add, long scale lengths usually command lower tunings solely for the sake of balanced string tension. One of my go to cbg’s has a 30” scale length with D’Addario .052, .042, .030 nickel wounds, which is strings 4,5,6 from a 11-52 set & lives in the world of low D & below? I would tune it to DAD or CGC to see if it makes a difference? I also have another few questions, (1) have you verified that your fret spacing is correct, if one is off, your tuning will also be off. (2) is the action at the nut high, this will make chords sound out of tune. 

• ▶ Reply

Permalink Reply by Korrigan on January 15, 2022 at 5:37pm

If you are going for bass (G1 D2 G2) use 72 58 36.

If you are going for normal (G2 D3 G3) use 36 24 17p.

• ▶ Reply