Replies to This Discussion

Permalink Reply by Rand Moore on December 9, 2011 at 4:19pm

Hi Bert,

The boxes I prefer are all made of wood with minimal or no glued-on paper artwork (dampens the sound), with box joined corners (aka finger joints), with large as possible length, width and depth dimension and thin top (lid) and bottom. I like prettier the wood and wood finishes with no scratches, dings, or material defects. I also prefer the kind of box where the lid has sides (i.e. after building the box, they cut it with a band saw to form the lid with edges (lid sides) about 1/2 to 3/4 inches tall"). With these, the neck can be mounted to the lid of the box so the box can still be opened when the build is done. If the neck is mounted to the bottom side of the box, it can't be opened once the instrument has been strung up (not w/o re-stringing the instrument). Generally, the larger the box and the thinner the sound board and back board, the louder the instrument will be without resorting to electronic amplification. I don't really pick boxes based on brand names or how pretty the artwork on the box may be. Good luck with your box hunting.

-Rand

• ▶ Reply

Permalink Reply by Bert the Welder on December 10, 2011 at 11:34am

Thanks Rand. I figured good size ones will be a good find.

I should ad to my original post that pics, if you have some, of the boxes/tops would be great too. I can print them out and make it easier for them to be spotted.

Thanks again,

Bert

• ▶ Reply

Permalink Reply by 3 String Blues on December 10, 2011 at 1:09pm

best boxes????? hands down by far ....a "Padron 4000" OR close 2nd, a Padron Chruchhill.

 

its the cat's meow......and the lion's roar!

• ▶ Reply

Permalink Reply by MichaelS Country Boy Guitars on December 11, 2011 at 5:40am

Any Padron is a good Padron. 3000 and 5000 are decent too, 2000 sound good but seem smallish. Beetle is right the 4000 is a great box. 

• ▶ Reply