So I was looking at a friends shop the other day and I find this 2" dowel. Just looking at it it seems like if you ripped it long ways it might make a nice strong CBG neck.
I figure I must be missing something. Did anyone try anything like this?
Tags:
I'd say go for it, part of the fun is to see what happens. But a couple things come to mind - a 1x2 rectangle even with well rounded edges will be stiffer than a half circle. It would also depend on if it was hardwood or not. Also the headstock will be interesting!
Thanks for the reply. Here I was thinking I was all smart with the idea that a half circle would be stronger than the rectangle. But then even if it was it would only be in the direction of the uncut radius and so probably not the great cigar box revolution.
Going to back burner it though I think I'll try to make it later with an inlaid fretboard. Maybe headless put the tuners on the bottom.
Still could be a revolution. I'm stuck trying to visualize a scarf joint with the dowel, but the tuners on the bottom would definitely work.
To do the scarf joint I would cut the dowel then take a 1/4 and scarf it and glue the two together.
Go for it, commercial guitars have necks shaped into a half circle cross-section (well really close)
I haven't cut a dowel, but I did use a 3/4 round pine stair-railing piece for a neck on one of my builds. Gives new meaning to "baseball bat" neck, but it fits nicely in my hand and plays just fine. Hasn't bowed one bit under three-string tension, although it has only been about 4 months since it was strung up. Cutting the headstock WAS a challenge I wasn't pleased with the result - but going headless is a great idea. I agree with Kigar and JL... just go for it.
Depends on what wood type the dowel is made of will determine if a trussrod is needed. Example - Soft Pine
Sledge Hammer Handles would be great being most are made of Hickory.
When I first started thinking of building I thought about Large tool handles ripped in half and then further shaped, Mostly because if done correctly it would unique and allow my ever loving laziness to persist.
Why work so hard when someone else has done some of the work right? ;)
They were remodeling a recovery home and I drove by. The workers had pulled off all the hand rails (maple) and had threw them in the dumpster. I asked if I could have them. My garage has a pile of maple and cherry 1 1/2 hand rail. I just flattened it on the jointer and it is big enough for a 3 string. There is a flat side to it so it wasn't too bad
Nice. Yeah, I would need to find a table saw for this but then again my wallets getting heavy and my arms are getting tired. Keep us posted if you get into it!
Fantastic!
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 14 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 14 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!