Replies to This Discussion

Permalink Reply by Tony Davies on August 3, 2011 at 11:41am

On reflection I suppose I should have have made them inside out so the ply is outside ah well.

• ▶ Reply

Permalink Reply by Dan Sleep on August 3, 2011 at 12:54pm

That's just a good excuse to make some more!!

Tony Davies said:

On reflection I suppose I should have have made them inside out so the ply is outside ah well.

• ▶ Reply

Permalink Reply by Tony Davies on August 4, 2011 at 12:51am

True

• ▶ Reply

Permalink Reply by Little Soul Eric on August 4, 2011 at 2:25am

them orange ones look well nice tony

some nice black pickups n knobs would suit them real well

 

• ▶ Reply

Permalink Reply by Bad Finger (Eric) on August 4, 2011 at 2:58am

I think they look just fine! It's the way I would have done the same.

• ▶ Reply

Permalink Reply by Tony Davies on August 7, 2011 at 2:58am

As my dear lady was out for a while , did a little more

 

found a bit of mahogany for the next and a bit of amazique for the fretboard ?

and maybe the pickup i got from juju?

Some black hardware and black corners - coming along slowly . found a roll of jumbo fretwire so should it be fretted or fretless mmm

• ▶ Reply

Permalink Reply by Henry Strat-o-varius Lowman on August 7, 2011 at 3:42pm

Do a double neck with one neck fretted and one neck fretless. You will have the BEST of both worlds on one instrument!

• ▶ Reply

Permalink Reply by Tony Davies on August 11, 2011 at 4:34am

Nah - will make loads of guitars in different configurations just for the hell of it.

• ▶ Reply

Permalink Reply by Little Soul Eric on August 11, 2011 at 6:50am

coming on tony!! yep you gotta use Black knobs n corners, will look well cool

 

• ▶ Reply

Permalink Reply by Tony Davies on August 11, 2011 at 11:13am

I have a box of black plastic corners that I use on speaker cabs - that will do , hope to see at an open mic soon.cheers

• ▶ Reply

Permalink Reply by Tony Davies on August 23, 2011 at 3:20am

Hi Guys

 

Got a bit sidetracked this week an made a stomp box

Just need the rubber feet putting on , tested through my 5w valve amp sounded great.

 

And have stuck it up on my website for £25 a pop - gives me a little profit but not a lot as they say.

Pile em high sell em cheap.

 

Regards

 

Tony

• ▶ Reply