Tags:
I really need a router. Actually I have 3 routers. All get used a lot for different things. My Colt is used the most. I've used it to build stringed instruments (83 so far) to remodeling my kitchen. I've had very good luck with Bosch power tools. Mine lives with other well used power tools.
Eat it all - use it up - wear it out
Leroy
I haven't pulled the trigger on a router (yet) because I do not have much of a woodworking/mechanical background. I basically picked up CBG-ing 6 months ago with a grade 8-level of technical education and have had to learn the ins and outs the hard way with hand tools. And it's worked all right so far; my builds certainly aren't perfect, but I've learned a lot. But getting a router seems like a big investment of both money and time. I wouldn't want to spend $30 for a crappy Harbor Freight router (now that I've bought some of their planing and shaving tools & seen their product quality); it would have to be a pretty decent tool. I'd also have to set aside a chunk of time just learn how to wield it. I've made the mistake of taking a brand new tool to a build that I've spent weeks on; the results are usually brutal. There will come a day when I need one, and I will break down; but until then, hand tools for me.
To reprise my original reply......
I spoke of using a router and making templates and such was intended in the context of general use. I personally dont use one to shape a guitar neck per se. With the exeption of using a router table and pattern bit at times to duplicate a headstock shape, or for rough in, or set up as an edger for jointing thin woods.
I do use small and medium routers in other operations such as holes, openings, slots. Especially in bridge making, which I am setting up better jigs for as I figure out better ways to do them. Or for creating a pickup opening for mag pickups. Solid body builds get a lot of router use. I am expanding my tooling for binding and inlays, but currently have only a basic binding and a soundhole inlay setup for acoustic bodies.
Medium and big routers for counter top building, small router for laminate trimming etc..... etc......
CBG's? Only occasional use.
Apologies for any redundancy...I don't have time to read the whole thread right now...
Someone also asked in another post what a spokeshave costs. I was unhappy to see spokeshaves cost $90-130 at a 'serious' woodworkers store locally, one of the only ones that didn't go out of business in the last year or so. I'll bet they are quality ones.
About 2 weeks ago I saw one for $29.95 or so at a chain store like Menard's or similar (I don't remember)..started looking a lot more practical.
Then I got a flyer from Harbor Freight this week, and they had flat and curved face spokeshaves for $5.99 (might have been a sale price...the flyer is good until Feb 27, 2011).
The usual caveat applies with inexpensive tools (remember the work gloves,safety glasses, two hardhats and a baseball cup, if applicable). I call such sources them 'disposable tool stores' ...cheap enough to use one time and see if they work. Some are fine, some...well, depends on your expectations. I tend to lose tools due to accumulation of too much stuff...I might already have 1 of something in the garage and 2 in the basement, but can't find any of them. Cheap tools come to the rescue then.
Yeah, a bastard file can do less damage than an SOB router...
When I had a wood shop class in high school, the 'bring it home' safety instructions about a bandsaw included alerting us that it's a common tool for butchers...works great on fresh or frozen cows and pigs, so you can count on it working just fine on human fingers.
I also learned you don't cut round dowels freehand - you can get whacked in the stomach when it gets thrown by the blade...NOW they tell me! A v-shaped holding fixture prevented that.
Lionel Berthelon said:
I think I'd want a tabletop bandsaw instead, I have a porter cable router and it ate the shit out of my perfect headstock after catching a grain once while round back of neck. I'll stick to bastard files and drum sander
Diane,
That small router is good, depending on what you are using it for. If you're rounding of the back of necks, then no... too small and probably wouldn't work in a table. If using it for shaping tops, cuting designs and routing pockets for pups, then it could be really handy. I have a full size bosch on a table that I use to start necks. This discussion has me motivated to pull out a 1/4 drive that has been setting in a cabinet for over 2 year.
the best,
Wichita Sam
I have a router and the same bits my dad gave me in the early 1980s - all much used when I got them. I am a cheap-ass and have never bought new bits. I have used the router for rounding necks, but now prefer not to do this. I think with a '1inch' neck + 1/4 inch fret board (what I most often use) that I don't want to remove any more wood than necessary. I round with a rasp and sand a bit.
One of my most used tools is a random orbital sander. Great for sanding and shaping.
I'll bet those 80's bits might be better quality than what comes with a $30 router or is offered as accessories for the $30 router. I try to limit myself to hand tools and not power tools from inconsistent-quality sources. I've heard too many horror stories of flying pieces, be it the woodwork, or parts of the tool.
While 'you get what you pay for' applies in many cases, I don't mean to badmouth H-F across the board. They have offices and Customer Service in the US, and I have gotten competent answers from them about trying to use something for slightly different purposes, and for one product (a white nylon pop-up 'photo tent' for photographing small objects with external illumination diffused through the white fabric), the manual had no information about how to collapse the thing and maybe get it back inside the box. They emailed me a sequence of photos illustrating the steps needed to do so, in a matter of minutes.
Within reason, and within their terms and limitations, I think they will stand behind their products. How smoothly and precisely they perform compared to the more costly alternatives leaves us at that budgetary crossroads...
Uncle John said:
I have a router and the same bits my dad gave me in the early 1980s - all much used when I got them. I am a cheap-ass and have never bought new bits. I have used the router for rounding necks, but now prefer not to do this. I think with a '1inch' neck + 1/4 inch fret board (what I most often use) that I don't want to remove any more wood than necessary. I round with a rasp and sand a bit.
One of my most used tools is a random orbital sander. Great for sanding and shaping.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 54 minutes ago. 0 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!