I've been using a triangle file to create slots in my nuts for my strings, but I'd like to be able to do proper nut slots at some point.
However, I'm not quite ready to drop ~$100 for a set of StewMac nut slot files.
I've seen some cheapo "nut files" that are apparently really fuel-jet cleaning files; do those work? Are they reasonable substitutes for proper nut slot files for guitar work? Is this overkill for CBGs?
Tags:
What about these:
https://www.cbgitty.com/tools-templates/cigar-box-guitar-nut-and-br...
I have a very similar set that seems to work just fine.
I have feel gauges that I used a Dremel cutting wheel to cut small notches spaced very close to each other, thus making various slotting files for many string gauges. check this video out:
https://www.youtube.com/watch?v=CslelQBTwP0
You are so right about the fuel-jet files. They can be purchased at any welding supply shop. <$20
harbor freight also has the fuel jet files. I use them as well
What section of harbor freight & how much were they? I've asked in two stores and either they didn't know or these stores didn't carry them. I personally looked in the welding, no luck.
Many of us, me included, use the torch tip cleaners from Home Depot. They are in the welding tool section by the power and hand tools. Made by Lincoln Electric and around $5.
Torch Tip Cleaners - Home Depot
They work great for shallow slots. But for cutting deeper slots or making a lot of cuts for doing multiple nuts (if you are doing a batch) they can be tedious to use, so I snip them out of the metal casing and use a jeweler saw to hold them for improved stability and easier on your hands. I use a cheap jeweler (frame) saw similar to this:
Well aren't you the smart one! LOL Damn good idea using a jewlers saw, something else i gotta buy.
I’ve seen those in Home Depot, they’re pretty much same as the cb gitty one, but half the price $3.97? You’ll eventually need this tool anyway if you make your own nuts/bridges? And, no it’s not too much to file nut slots on a cbg? if you care enough to put quality in your instruments, then it’s only natural to go the extra mile.good luck to ya’ :)
I've used the tip cleaners before and they work, just takes time.
Stewmac sells 4 string uke nuts that are already slotted and they work great, but I just use a brass or steel bolt for a nut nowadays. Just file a half round slot for the bolt deep enough for proper string height and the grooves are already done. ;)
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 13 hours ago. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!