#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

First build in years.

Ya, it's been a long time. I want to get three done. This is the hardest of all three. Thought it would be awesome to get the fun one first. This will be a piezo semi hollow guitar.

The guitar will be made in four layers. The top is 1/4 ply. The second layer down is 1/2 ply. Third layer is 3/4 maple from a table top. This layer will support the neck. Bottom layer is another layer of 1/4 ply.

First. Each layer will first be cut into 13 11/16 x 17 7/16 rectangles. Each piece of wood will get a 3x3 inch grid. There are three patterns. Each patter has 3x3 grid markings. So they will line up in the very same spot on each piece of wood.

The bottom layer gets two recessed plates. The will be cut out of and sit flush in the 1/4 ply. I'll have to start each with a knife cut. Then use a jig saw to finish them. These tow access plates will screw into the maple layer above them.

The maple layer will get three cavities cut out of it. One for the pots and jack. One for the three way toggle switch. And one large one on the left side, as your looking at it in a stand, of the guitar.

The 1/2 ply layer is mostly one large cavity. There will be support for the output jack. And a block of the same wood for under the bridge.

The top layer will get holes for four knobs, the output jack and three way switch. There will also be a sound hole.

At this point the four layers are still rectangles. I'll first glue the top two layers together. Then cut the neck pocket out of them. Then glue the rest to make one block. Once dry I'll cut the body shape out.

The two piezos. The one at the neck will be permanently sealed within the guitar. the only way to have access to it is to make a plate on the face of the guitar. Choosing looks over function. The second piezo will be under the bridge/

Two pics. The first pic is the maple layer. The second is the 1/2 ply along with the block for the bridge.

2 members like this

Attachments:

IMG_maple layer.jpg, 976 KB
IMG_1:2plylayer.jpg, 260 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Cause the Blue rat on August 1, 2018 at 11:27pm

Drill press. I was on my very last 3 inch long slot. Just happen to think. "You know, I can set up a jig and cut these slots out with my jig saw..." Probably would have been faster than moving 1/16 of an inch at a time with a foster bit.

Was hoping to make one end permanent. so I wouldn't have to worry about it coming loose.

got an email today. Guess what pickups are coming. Yep, those Alexander Pribora pickups are now on their way here. So it's back to those going into this guitar. I'll now have three black pickups instead of one black and two white. Three switches came in today! The five way blade super switch, the regular five way blade switch. And the DPDT on on on switch. Yes, they are all going into this one build. But more on that when I get there.

▶ Reply

Permalink Reply by Taffy Evans on August 2, 2018 at 10:01am

Hi cause, what I would do is to run a nut on one end run some superglue in the thread, or centerpunch either side of the nut.

For slots in timber I drill a hole at each end of the intended slot and saw between the two. Nice clean slot with nice rounded ends. Works in my Perspex and aluminium jigs too.

Taff

▶ Reply

Permalink Reply by Taffy Evans on August 2, 2018 at 11:04am

Hi again, just thought I would show some of the slots I have cut the in way I mentioned above.

Cheers Taff

▶ Reply

Permalink Reply by Cause the Blue rat on August 4, 2018 at 10:07pm

Wiring diagram for RATdillac. There will be three volumes, two tones. The bridge will have it's own 500K volume and tone, Neck and mid will both have a 205K volume knob and they will both share one 250K tone. Each volume will be wired to be independent. So each pickup will only 'see' one volume. Still debating wether or not to wire in a master volume. There will be two five way switches. One for all three pickups and one just for the bridge humbucker. There is also one on,on,on, DPDT switch. This wiring will give me 44 different sounds out of one guitar. And is going to be a monster to complete. REALLY looking forward to this!!!!!

Information on this wiring

Nine way strat wiring

Independent volume wiring

5way superswitch humbucker

▶ Reply

‹ Previous
1
…
6
7
8
Next ›

RSS

Welcome to
Cigar Box Nation

Sign Up
or Sign In

Or sign in with:

The Essential Pages

Site Sponsor

Forum

Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost

Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes

No Harmonics

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes

Camera suggestions?

Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes

CBG site issues, continued.

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes

Anyone used a violin-style tailpiece on a CBG?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes

Guitar for the grandson

Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes

Building with vintage paper/pressed board cigar boxes.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes

.✨. Cover Me ..♪♫•¨•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like

Latest Activity

Gary O'slide posted videos

5 minutes ago

A.D.EKER commented on Poorness Studios's video

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Nice ly done Kale olthow whit verry minimal typecal Space odity effects, i know it was your Bowie…"

8 minutes ago

Dogleg Steve posted a status

"Hey - I came runner up top 10 of the 2023 4th annual international CBG video playoffs!"

1 hour ago

0 Comments 0 Likes

Dogleg Steve posted videos

1 hour ago

Doug Thorsvik commented on Poorness Studios's video

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Wow! Well done Kale. Nailed it!!! You really captured the essence of the song and it’s…"

1 hour ago

Dogleg Steve posted a status

"https://www.youtube.com/watch?v=R0ZKu7T1wAI"

1 hour ago

0 Comments 0 Likes

Poorness Studios posted a video

David Bowie's Space Oddity (covered on guitar & Stylophone)

I've been meaning to do a cover of this since I got my David Bowie Stylophone last Christmas. This song is outside my vocal range and difficult to sing, but ...

2 hours ago

2 Comments 1 Like

A.D.EKER commented on A.D.EKER's video