This group is for discussing the basics of CBG building for newer builders - where to start, what to do, common pitfalls, tips and techniques.
Keep in mind that new builders can find other great informative articles on CBG building, as well as most of the parts you'll need, over at C. B. Gitty Crafter Supply!
Members: 1746
Latest Activity: Mar 20
MySpace
Tweet
Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies 2 Likes
Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies 4 Likes
Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply 0 Likes
Comment
Yeah, screwing one of those eyes into an old piece of hickory is probably tougher than they were designed for!
Congrats on finishing up a great build!
"the D sits a little lower than the G's making some stuff harder to use my slide on...."
Dead easy to fix while you are at it.
While all my fretted setups compensate for string thickness on the bottom (fingerboard side) I would set-up for slide with the top surface even.
File the slots as needed for depth to achieve the above, while keeping the width just snug for the specific string gauge, and roll off the tuner side of the nut to approximate the string break over the nut. (I target 15 degrees. But whatever works.)
Thanks folks - I am going to try Mark's suggestion first as its the cheapest and easiest (couple new strings, wind them down further, along with cleaning up the nut), if that doesn't work then a string retainer (primitive of course) will be figured out....
I kinda knew I'd have to address this - the D sits a little lower than the G's making some stuff harder to use my slide on....overall though I am pleased!
A string tree would also work, but if it were me, I'd try the previous recommendation first, as IMO the existing rustic look would be better retained without.
It looks to me as if leaving enough slack when stringing it up, so that the wind goes nearly to the bottom of the post would create plenty of angle.
Looks like the same tip might be a good idea on the high G as well.
String break angle. The string is supposed to angle downwards towards the tuner, not straight in-plane to the tuner. Need a string retainer/string tree.
New strings always stretch a while then settle in, that may be most of the wandering tuning issue.
Next time you string it up, I would try the following-
File the back side of the nut to allow the front edge to provide a clean break, and leave more string so you can wind down further on the tuner post, to provide more angle over the nut.
Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies 2 Likes
Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies 4 Likes
Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply 0 Likes
Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies 0 Likes
Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies 0 Likes
Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies 1 Like
Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies 0 Likes
Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies 2 Likes
Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies 2 Likes
Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies 1 Like
Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies 1 Like
Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies 1 Like
Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies 0 Likes
Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies 0 Likes
Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies 1 Like
Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies 0 Likes
Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies 4 Likes
Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies 0 Likes
Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies 2 Likes
Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!
You need to be a member of Building a Cigar Box Guitar 101 to add comments!