I'm getting started on a new build today, and it's the first time I'm using a fretboard. Many of the photos I see have a fretboard that is a different color than the neck. I really dig that look, and I have a couple questions before I get to far into this:
1. Do you stain the fretboard before attaching to the neck?
2.Do you stain the fretboard before fretting? On my last build I used old credit cards to protect it from the file, but i still ended up with some gouges.
3. Would it be easier to stain the neck and keep the fretboard natural? If so, how do you sand the seam where the neck and fretboard meet without wrecking the finish?
Any help would be greatly appreciated!
Tags:
I'm in the finishing stages on my first CBG build . I, after reading more then I probably should have, roughed in my neck cut the fret slots in the fretboard, then glued it on the neck. I then sanded and shaped the neck to my liking{ came out really nice.}Then I set my frets and filed and sanded them smooth, this seemed to work very well. I did"nt have to worry about messing up any stain or finish. I stained the box, then decided to stain the neck, so I masked off the fretboard with blue painters tape, again it worked out well. The neck and headstock is Hickory, the fretboard is Cherry with Walnut dots and stainless frets. The natural neck really looks good. I really think all sanding and filing should be done before any finishing. Why take a chance. Allen
This is a real Chicken or Egg question. Try both ways. I almost always apply fret board before finishing. Part of my neck preparation is "decking" the neck to a perfect flatness on a flat table with glued on sandpaper. That way I (almost) never have to dress frets, except for finishing the ends.
the best,
Wichita Sam
Baked fretboards
Wrap in foil, bake at 220 degrees Celsius for 20 minutes. Darkens them to the core. If you do not want a fire do not forget the foil.
Gibson have been doing baked maple fret boards on production guitars for years.
I haven't heard of people baking a neck but your mileage may vary.
A lot of people are doing it at
The 2 by 4 challenge over at the ukulele underground luthiers lounge.
I have stained fretboards before gluing them to the neck, like when I want to fake ebony by using ebony stain on a poplar fretboard. I usually cut fret slots first, then make sure it is pretty darn close to the width of the neck,(cause if I have to sand it, it will sand off the stain) then stain it, but keep in mind that oil stain will keep your glue from holding so I tape off the back of the fretboard with good masking tape first, and use the stain sparingly. Then I apply whatever finish after gluing it up and installing frets.
I do it wrong. I cut the fret slots, stain the fret board, install the frets, glue it on, sand and file the sides and fret ends, then mask off the neck with painter's tape and restain the sides of the fretboard that the sanding messed up.
Thought I'd chime in with the method I use, maybe it can help someone.
I generally choose contrasting woods from neck and fret boards but sometimes I'll stain a fret board to bring out interesting grain. What I do if I've glued the fret board to the neck and change my mind and stain it. I first finish sanding the neck to completion. Then I mask off the fret board and press hard on the edges of the tape to ensure a good seal. Then I spray clear lacquer over the neck, generally a couple light coats, to seal it off.
When you remove the tape you can then stain the fret board without worrying about getting stain on the neck and botching the job, having to resand everything. When you get the stain you like, then seal everything in with a few more coats of lacquer. done...
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 10 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 11 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!