Having just completed my first build I was thinking over the things I'd do differently and the parts of the build that gave me the most trouble. Building the box from scratch was truly simple woodworking and was perhaps the easiest major part of the build.
Making the neck and fretboard however was a different matter. Whilst my first build is fretless and don't suppose the neck and fretboard being a tiny bit out of true mattered too much, I sweated over getting it as accurate as possible by hand sanding alone.
Deciding to go fretted on my next build I began looking at planer/thicknessers and quickly came to the conclusion they were out of my budget for the time being. So I started looking on line at what other solutions there may be and stumbled across people having made their own. Whilst there were some great builds (I will probably take inspiration from them and build a bigger machine at a later date), I wanted to use what I had lying around in my workshop.
After much pondering I decided to mount my handheld belt sander in a frame so timber could be fed through underneath on an adjustable bed.
As the build is based upon a 4 inch sander it will only be good for necks and fretboard although I will also try it for small planks to use in box construction.
I haven't given it a proper test yet but seems to works really well, the main problems may be, making sure the felt is square to the bed and having to push timber through uphill.
Have a look at the pics.
I'd be grateful for your thoughts.
Tags:
Glad it works ok , but that's a awful lot of sawdust to make a fingerboard blank
To take a piece of timber from 12mm to 6mm is a planing job, not a sanding job. A sharp and well set-up hand plane will do the job quicker and more accurately...there's no substitute for having the skills with traditional hand tools.
Unless, of course, you substitute something else for it.
That being said, I would love to have a nice hand plane set up well enough that Roy Underhill would be proud to use it. I just haven't found one for the right price and learned everything about it yet.
My whole house is sawdust!Dunno if its the AZ dust or my wannabe CBG's!It's hard to maintane a work shop and keep everything clean.I do most of my work in the front room of the house.If its sanding,filing or cutting I try to do it outside,but I prefer to work 10pm til 6am inside.
Lots of work doing a fretboard,I buy blanks and rip them to the width I need,not much sanding.
I have a Harbor Freight hand-held electric planer... It's scary to operate, and throws sawdust like there's no tomorrow... you have me thinking!
http://www.harborfreight.com/3-1-4-quarter-inch-electric-planer-910...
DO NOT f•ck about with one of these. Used properly they are a handy tool, but under no circumstances try and rig one of these up in a bench mounted jig - you are asking for serious injury. These rotational speed of the blade is very high,(16 000-32 000rpm..that's 15-20 times faster than a belt sander) so even used normally they can kick back or throw big splinters of timber out if the feed rate is too high or if you are trying to take too deep a cut. Trying to jury-rig one of these as a cheap substitute for a bench planer is madness - there's enough kinetic energy at the blade to send a piece of timber straight thru' a pair of safety glasses or into part of the human anatomy of someone unfortunate to be in the vicinity. The prospect of a flesh and bone contacting the rotating blade is horrendous. Don't even think about it.
I don't want to stop people being creative with tools, and I reckon I'm pretty careful with power tools, but I've had a few nasty nicks and scrapes to my hands and lost the odd fingernail over the years. I think unless you've actually experienced a close shave with a power tool, it's difficult to comprehend quite how dangerous they can be...so be careful out there.
i totally agree John, don't f##k with power tools people . this discussing had me squirming. use the right tools for the job.our local timber store will prepare and mill any wood you buy there to size-free of charge.
buy a decent plane and learn to keep it sharp, and a spokeshave. i really dont get this idea of using a rasp for shaping a neck
happy safe building guys
Couldn't agree more. I avoid power tools at all costs these days due to a few injuries. Couple of them my fault one of them faulty equipment but now I've lost all the skin off my hands, took a quarter inch strip out of my kneecap with a grinder etc I have a very healthy respect for all power tools. I even use a hand auger for drilling these days. I have two electric planes and all I've ever done is fire one up look at the blades spinning and packed it away again, no way should anyone ever try to jury rig one of those.... "Well you see Doctor it happened like this....."
No argument from me here. I have one, and after a few scary attempts at repurposing it, I decided that that blade design just isn't for the imaginative. It is quite vicious about doing what it was made for though.
I treat amputation with more respect than road rash.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 2 hours ago. 0 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!