Replies to This Discussion

Permalink Reply by Wes "I'm Baaaaack" Yates on December 2, 2009 at 3:37am

Of course, I can always cut out the rest of the holes to get it bigger

Try your idea. Better to have it and need it, than need it and not have it.

Also think about doing a prototype out if 1/8" - 1/4" MDF/pressboard. 'Bout the same tone structure and will save the box lid from... self inflicted damage. You'll have to cut the lid off from where it meets the box, but that's little damage. Plus if you get the Fholes the way you want, you can always use that as a cutting template.

-WY

• ▶ Reply

Permalink Reply by Richard Cottrell on December 21, 2009 at 3:19pm

Lenny's Harley box sounds great -- it sounds to me like the sound -- on it's way to the amp -- is plugged into an effects box -- it sounds great. I think the effect that f-holes have is actually not all that dynamic. I put a small hole the size of a dime -- not on the front but on the side that looks up at me. Because I wanted to leave the front panel alone so it can vibrate fully. It works just fine for me -- the sound is good.

• ▶ Reply